Scale Model Shop

Collapse

Trumpeter 1/32 Fairy Swordfish Mk 1

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • BarryW
    SMF Supporters
    • Jul 2011
    • 6032

    #1

    Trumpeter 1/32 Fairy Swordfish Mk 1

    This is likely to be my last build for a while due to placing my home on the market soon and, in March, moving to a new build. It may take a while then to get a 'man-cave' sorted but the motivation will be there due to the quality of the stash that I have been saving for after my move. This build means quite a lot to me so it is worth giving some background and telling the story.


    Having just built the most advanced and modern looking aircraft in WW2 I am now building one that was obsolete at the start of WW2... A fragile, slow, biplane nicknamed 'The Stringbag'. Obsolete it may have been, but it made a big impact on the war. It was a Stringbag that damaged the Bismark enabling her to be caught and sunk. At the Battle of Taranto they attacked the Italian navy sinking a battleship and seriously damaging another two, plus other ships. These aircraft served right through to VE Day and outlived aircraft designed to replace them.


    Operation Cerebus in 1942 involved the battleships Scharnhorst, Gneisenau and the heavy cruiser Prinz Eugen transiting the English Channel, leaving Brest heading for their home ports in Germany. This was commonly known as 'the Channel Dash' with the British attempt to stop them being known as 'Operation Fuller'. The Germans decided that secrecy was paramount and so started their move from Brest under the cover of darkness. They managed to keep the operation secret for 12 hours but it meant that they had to get through the narrowest and, for them, most dangerous part of the Channel, the Straights of Dover, in broad daylight.


    The British defences were wrong-footed and taken totally by surprise. They had to respond in a hurry and did so with coastal artillery, aircraft and what surface units they could scrape together. The German big ships were not alone as they had an escort of destroyers and e-Boats while the air swarmed with their fighters.


    Six Swordfish armed with torpedoes, with 18 crew, were sent to attack the German ships. They were meant to have an escort of 84 fighters but only 10 made the rendezvous. Nevertheless they pressed on with the attack knowing they had little chance of success. Every one of those 6 Swordfish was shot down and 13 of the crew were killed. Lt Cmdr Esmonde who led the Swordfish won a posthumous VC for this action. Vice-Admiral Ramsay wrote "In my opinion the gallant sortie of these six Swordfish aircraft constitutes one of the finest exhibitions of self-sacrifice and devotion to duty the war had ever witnessed", and German Vice-Admiral spoke about "the mothball attack of a handful of ancient planes, piloted by men whose bravery surpasses any other action by either side that day".


    It is one of these six Swordfish that I want to represent with this build.


    So why does it mean a lot to me?


    I am sat typing this in my office. I look out my office door and there, across a slip road, over a dual carriageway, over the top of masts in the marina is a clock tower standing at the western end of Dover Harbour as it did in 1942. It is a short walk away and from there I can see the massive enclosed artificial harbour looking much as it did in 1942. Its shape will be familiar to you all from documentaries and films like the Battle of Britain. Looking past the breakwater I can see the coast of France and on a clear day from that spot you can even see the clock tower in Calais. During the war Dover was known as Hellfire Corner due to it being in range of big German guns on the French coast. Calais is only 21 short miles away and I can stand there and imagine the sights as the German ships made their Channel Dash. Dover Harbour must have been one of the last things seen by those gallant Swordfish crew.


    But not only that - my family has long lived in Dover and my grandmother decided not to evacuate her children saying 'if we are going to go then we will all go together'. So my dad was here in the war and had a ringside seat for the Battle of Britain and much else that went on around here. He has a lot of stories. But there is more, for a period of six months my granddad was based in Dover and able to be with his family. He served in the Royal Navy and while in Dover was on one of the 'Grey' class Steam Gun Boats whose job was to tackle the E Boats. The SGB flotilla was commanded by Lt Cmdr Peter (later Sir Peter) Scott, son of Scott on the Antarctic and himself post-war becoming a famous conservationist. My granddad was in Dover in February 1942....


    So this is a very personal build.....


    On to the kit....


    The picture below is the scheme I am using and it will be an out of the box build except for some fabric seatbelts as the kit p.e. ones are very crude. This having an open cockpit means these will be very visible.


    I will be using Vallejo and AK paints and for the first time the new unpronounceable Badger primers.


    [ATTACH]116975.IPB[/ATTACH]



    Here are the parts, off the sprue for the main interior build ready for clean up.


    [ATTACH]116976.IPB[/ATTACH]



    initial sub-assemblies


    [ATTACH]116977.IPB[/ATTACH]






    Attached Files
  • Guest

    #2
    Nice subject and start Barry, definitely sitting in and watching this build mate

    Comment

    • tr1ckey66
      SMF Supporters
      • Mar 2009
      • 3592

      #3
      Great kit, great back story and I'm looking forward to an excellent build. I think my build (when I get round to it) will be of an Ark Royal a/c that attacked Bismarck. They were very brave men to fly these antiquated aircraft against such formidable defences and much faster fighter aircraft. And the story of these pilots with limited fighter escort is an extremely courageous one.


      Looking forward to the progress.


      Cheers


      P

      Comment

      • Dave W
        • Jan 2011
        • 4713

        #4
        I will be watching this one as well.Got the Tamiya


        1/48 kit in my stash.A work colleague has built two of these Trumpeter kits and has them in his office.The wings on both droop down towards the ground.Dont know if he's assembled them wrong or if they need strengthening.Might be something to watch out for Barry.

        Comment

        • Guest

          #5
          Great looking planes, look forward to the build

          Comment

          • Guest

            #6
            Nice aircraft to build. Built the 1/48 and it was a delcious model to build.


            To add Barry to your history of the aircraft hope you do not mind.


            The Swordfish destroyed and sank more enemy shipping than the total sank by British aircraft in WW2.


            With their slow speed and mobility when they attacked the Bismark they flew very low on their last visit.


            So low that the Bismark's guns were unable to to train low enough to attack them. This was courage as


            they were very close to wave height. Any boatman will tell you as I know from experience that wave and


            wind change at nature's wim.


            The crew was 3 some times 2 depending on the actions. They were completely , with out a cockpit cover,


            exposed to the elements summer winter. Many squadrons, they were Fleet air Arm, subjected to the total Atlantic.


            They served in Merchant converted Escort Carriers. some times they were catapulted others taking off


            from a bucking carrier. No sophisticated where am I where are you. Then when they got back they


            landed on a bulking broncho . Looking at photos their aircraft were in a total mess with paint just


            stripped from the canvas.


            For me as Barry says they were real men with courage. Take off horrible, miss ship position, one engine


            land on an aircraft short based carrier in gale conditions all exposed to the elements.


            Real men.


            Laurie

            Comment

            • Snowman
              • Oct 2014
              • 2098

              #7
              Cool!


              You have my attention!!

              Comment

              • takeslousyphotos
                • Apr 2013
                • 3900

                #8
                I'll be sitting watching this Barry .......... A very Iconic Airplane.... and in 1/32 it should be very special. I'm looking forward to it.

                Comment

                • flyjoe180
                  SMF Supporters
                  • Jan 2012
                  • 12463
                  • Joe
                  • Earth

                  #9
                  Nice kit choice Barry, and very nice to have that personal connection to the Swordfish.

                  Comment

                  • papa 695
                    Moderator
                    • May 2011
                    • 22788

                    #10
                    Think I will join the rest and watch this one Barry

                    Comment

                    • BarryW
                      SMF Supporters
                      • Jul 2011
                      • 6032

                      #11
                      Did a bit more work last night but as I was out for a curry with my sons not much...


                      [ATTACH]117017.IPB[/ATTACH]



                      A question


                      See the long piece of plastic next to the cockpit floor with a cross piece at one end. The instructions are vague about the fit. I can see where the round end goes, there is a depression next to the rear seat/stool and the instructions look as if it is angled forward.


                      What I cannot see is where the 'cross' end goes. Does it for straight forward leaning against the raised floor next to the seat? Or does it 'hang' in the air but if so what angle? Or does it angle forward and across to perhaps somewhere around the middle of the seat? Or something else?


                      There just is no clue at all in the instructions or in the fit.

                      Attached Files

                      Comment

                      • yak face
                        Moderator
                        • Jun 2009
                        • 13870
                        • Tony
                        • Sheffield

                        #12
                        Fantastic choice Barry , its a kit ive long admired . It makes up into a surprisingly large model and the big scale really suits the stringbag , all the open cockpits meaning the detail will be on full show . Ive seen these built with the wings folded but seldom spread so hopefully Daves observation of his mates droopy wings will come in useful.Really looking forward to seeing the build . Great to hear the personal reasons for the build too , always makes a model more special when theres a link to yourself . cheers tony

                        Comment

                        • Gern
                          • May 2009
                          • 9255

                          #13
                          Found this pic here Barry:


                          http://forums.airshows.co.uk/viewtopic.php?f=44&t=12331


                          [ATTACH]117044.IPB[/ATTACH]



                          I've seen a couple of other pics (not too clear) which also seem to show this rod just sticking up at about 45 deg and not connected to anything at the top.

                          Attached Files

                          Comment

                          • BarryW
                            SMF Supporters
                            • Jul 2011
                            • 6032

                            #14
                            Thanks Gern. That was very helpful.


                            Mine will be with spread wings Tony. Not sure what to do about wing droop. I will have to give it some thought and see what I can do.


                            Couple of pics. Still preparing to paint the interior detail with more sub assemblies done ready.


                            Trumpeter really do not think through how they do instrument panels. A clear piece with a decal to place on top! If on top why a clear piece, besides as I know from precious builds the awful decal would just splinter when placed over the raised detail. Ok I suppose I could place it behind the panel, having washed off the glue on the back of the decal and use decal fluid to stick it then mask the dials and the paint the panel. But then most of the detail will be painted over. I think I will paint the panel and pick out the detail with a fine and fairly dry brush.


                            [ATTACH]117066.IPB[/ATTACH]



                            The other puzzle with Trumpy is why they mold a vulnerable part like a T shaped attenae on top of the fin as there is no chance it will survive the build. I have preempted that by cutting it off and placing the T section superglued to a lolly stick to paint. I will reattach at the end.


                            On Monday I will apply primer to all the interior parts ready to pre-shade ahead of the base coats.

                            Attached Files

                            Comment

                            • BarryW
                              SMF Supporters
                              • Jul 2011
                              • 6032

                              #15
                              A little bit of progress made but not exacly photogenic. I have primed the internal parts and I have pre-shaded them. I do not usually pre-shade cockpits but as a lot will be on show I decided to do so and give the internals the full treatment. This kit is full of 'holes' through which detail can be seen so I am being careful to paint everywhere as I do not know what will be visible.


                              I will post some more detailed pics when there is some detail to show you!!!


                              Here are the primed parts, or most of them anyway......


                              [ATTACH]117305.IPB[/ATTACH]



                              I found the Sty???? (Badger) unpronouncable primer excellent. Great coverage and it dried to a smooth even finish. I did need to shake it a lot and I placed a ball inside to act as an agitator. It seems a little darker than the Vallejo grey prinmer, which is a good thing as you can better see where you have sprayed.


                              I sprayed at about 25psi unthinned.


                              Tonight I will be able to paint the cockpit green base coat and will post pics. I will also be able to start picking out detail on the instrument panel. I will only have two more sessions before I am off on a cruise so there will be a break after that for a couple of weeks as I explore the Baltic...

                              Attached Files

                              Comment

                              Working...