Typhoon TK-17 based on Engel's Kit

[Guest]

Hello guy's Hello Ramesh

Well, my first post here will be to show you step by step the evolution of construction. My choice : TK-17 Arkhangelsk

To do her, a lot of modifications and improvement need to be done !

I'm apologize, my english is rusty and I'm afraid english version will contain less comments for the beginning of this project than the previous french's version.

Work started 04/05/ of this year. (This post are also in English on SP forum and in french in modelisme.com and on my website here : Carnet de Bord

Here is the pictures story with short legend



First strong modifications of conning tower :







Engel Kit doesn't have starboard and port towed sonar array, TK-208, TK-17 and TK-20 have this device. I need to proceed modifications like ramesh did !





Original "Castor Tail" aren't correct for TK-17 but good if you want to do TK-12 for exemple...

Strong modifications again in this part of the aft...



There is no tile on the castor tail, I detemined the limit and do some modifications...









Starboard unfinish TSA...



Grid placement test... look great ! ^^



Aft escape hatch un up position





Strong modification of the lower rudder !









Ok that all for this first post

[Guest]

so next set of pictures (at the moment I've got about 125 pictures and workshop is not finish ^^)

Extract of Polar Bear modifying plans of the upper rudder and Led schematics implentation



Let's go, drilling session !



[/url]

[Guest]

Great stuff, keeping it up. Now I am getting the itch to do another accurate big sub...

[Guest]

Great stuff, keeping it up. Now I am getting the itch to do another accurate big sub...

Don't hesitate to pick some material on Subressources this site exist for that purpose

Another pictures set, another task, return near the conning tower for a time



















I was not satisfied about the rear rendering, so I done it again... and again... finally I stopped improvement whith this form :

[Guest]

After sanding, I decided to put the rudder in final position without sealed it yet !



Led rendering is quite good but form of the big one need to be improve... later task, this is not a priority. I will do this when I sanding the hull for primer correction...



A good view of the aft section, I did a trench for put easily dive plan mecanism



















I made some modification near screw, improving look regard the real one



I love this view, I thinking about accurracy of the aft and I decided to not fix the flap. They are no present in fact on the real TK-17

[Guest]

Well, aft section, a lot of work to do on prop tunnel

[Guest]

I tried to manage an maximum accurate modifications. It's no easy because some of them depend of the date, for exemple the aft part of conning tower change between 1991 to 2001 and between 2001 and 2007 ! :thinking:

It's really a nightmare to put some dates on photography except someone time like this :



(HD picture on subressources)

Some views before sanding the aft

I like this view, behin we can see the flag of nothern fleet













An other comparative view (I know it's TK-20 severstal... but general hull shapes are identicals between TK-17 and TK-20)





Détails récently add on the upper hull... I want a reallistic rendering

[Guest]

Workshop of a day : Admission water grid on bottom of the lower hull















With more four hundred grids like this to put left :shock:















Underwater navigation light, one White LED 800.000mcd ( ) and two UV LED 2.500mcd (pictures show the aft, there is a same configuration on the bow, but not done yet !)





At last I still have a lot of work to do. Today I fix minor détails before continuing the workshop

A picture of TK-208 during a bulava's test

[Guest]

I found last April a good website who sold vector images of flags and heraldry : Russia: vector images of flags and heraldry

I bought this for the front of conning tower, after a color correction I will made a dry transfert of it





(HD picture on subressources)

[Guest]

Good evenning everyone

Everything was fine on shipyard when I noticed sa tiny error on conning tower (a piece was wrong fixed). I decided to remove it and then... Tragedy ! :'(



After an screaming out loud session to remove the rest of anger, I tried to stay cool and redone the work...



Not wanting to stay on this incident before get sleep, I implemented a session of repairs ...



After a re sticking to endfest and sealing additions, it remains for me to sand and put chews on the old position wrong ...



After that I get sleep...

[Guest]

Hi Wis, first time I noticed that the prop shrouds on TK-20, in this shot, seems a longer than the kit version. Any thoughts?

[Guest]

You perfectly right, Engel prop are too shortoster_oo

In fact, it's the entire aft section who is false, the rudder is not enough long and the props are too high regards the waterline.

Normally the scale of tunnel prop (red line) is about 5.7 centimeters, on the models, engel made only 3.3 cm !:thinking:

Because modifications are too strong (and because I do not want to loose my temper and my nerves), I decided to "forgot" this particular détails...

Engel Hull is a melting compilation of many sources. Globaly it is a good start but the hull suffer some defects irremediable like this bloody keel boat...

[Guest]

As I work on conning tower yesterday, I wanted to start template of the plastic card of 0.15 mm thick which will be pasted on the front of conning tower or where the arkangelsk patch was painted.



First step, drawing on the conning tower...



Then, scribe on semi transparent paper, scan and redraw on illustrator and finally include the vector patch and typography.

It's ashame but I can't find the exact typography... I will change if I found better...



Print on paper and put on conning tower...Yeah that a pretty good look !





Done for a time

[Guest]

Because modifications are too strong (and because I do not want to loose my temper and my nerves), I decided to "forgot" this particular détails...Engel Hull is a melting compilation of many sources. Globaly it is a good start but the hull suffer some defects irremediable like this bloody keel boat...

Ah right, I understand. Still this is going to be the best RC Typhoon when its finished :respect1:

[Guest]

When glue get dry on conning tower I started to work on preissur hull.

Here is the render at this point :