Oggy trashes the Revell 1/48 Mosquito IV

[Guest]

I came across the Mosquito in our local model shop while on a visit there to get bits for the Spitfire. At about the same price as the Spit it struck me as good value and I am very fond of the Mossie so I thought I would buy it – after all, how hard can it be? (More of that later.)

Sorry for all the missing parts – I have been building it in parallel with the Spit.

The box is quite substantial and they are not bluffing. Inside there are 5 grey sprues, 4 are full size and 1 slightly smaller. There is also one transparent one along with the decals and instructions. Most are in separate polythene bags so well packed. Two of the sprues are nearly identical – these carry the things that come in pairs like propellers, spinners, engine bits etc.

I am going to raise a number of niggles and nigglets (a bit like a niggle but smaller). Some of these will reflect on the model and some on my lack of talent.

The first impression is of a lot of pieces (about 160 I think) and very good detail. The cockpit and bomb bay are fully modelled and there are two small Merlins. This leads to my first nigglet. The bomb bay doors, gear doors and nacelles are all modelled closed. If you want to have the doors open you have to cut them apart and if you want the engines visible, you have to saw up the nacelles.

Nigglet 2 involves the sprues. On the Spit (Tamiya) where the sprues led to very small or delicate parts, they came to a thin neck unlike this kit – for example

These are the bomb bay door jacks which are less than 20mm long to give the picture scale. You have to be very careful getting them off the sprues.

Nigglet 3 is the pins on which the gear and bomb bay doors mount in the open positions.

These may look fairly substantial in the picture but they are not. They are about 1mm diameter and very easy to knock off. Guess how I know.

On the plus side, there are a lot of options and extras in the kit. It has the colour scheme and decals for three variants. It also includes two different sizes of drop tank, three cameras, rockets, wing bomb pylons and cameras. It also comes with narrow and paddle bladed propellers. Good for a “what if”.

Onward! :beer:

[mossiepilot]

Good luck Roger, I did this kit as my first build back after many, many years away from building. I crashed and burnt big style.

Tony.

[Guest]

Step 1 – the office. This goes together fairly uneventfully. No shortage of detail and decals for the seat belts and panel although the panel is black and white.











The bomb bay is also nicely detailed.







Personally I think the gloss black as suggested in the distructions is too shiny and a semi gloss would be better.

Onward! :beer:

[Guest]

Good luck Roger, I did this kit as my first build back after many, many years away from building. I crashed and burnt big style.Tony.

I think I know why, but I'll get to that. :ranting2:hno::sadcry:

[Guest]

I've got this kit as well and plan to build it "flying" because of the famous problem with the landing gear. Just need to source some pilots for it! I never use gloss black on models anymore except maybe for instrument dials. In fact I seldom even use "black". my favourite is the Tamiya "Nato Black" which is a very dark grey and looks like black that's been bleached by the sun for a bit which to me looks much more appropriate. Good luck with the rest of your build, you've done well so far!

[Dave W]

Im impressed with the level of detail in this kit.Might have to get myself one.Ive got the old Monogram kit in my stash,but this one looks a lot better despite the known problems with the undercarriage.

[Guest]

I've got this kit as well and plan to build it "flying" because of the famous problem with the landing gear. Just need to source some pilots for it! I never use gloss black on models anymore except maybe for instrument dials. In fact I seldom even use "black". my favourite is the Tamiya "Nato Black" which is a very dark grey and looks like black that's been bleached by the sun for a bit which to me looks much more appropriate. Good luck with the rest of your build, you've done well so far!

Yes I got into a mess with the landing gear Andrew when I built mine last year.

But Tony (mossieman) recorded how he constructed his landing gear which was out of the nacelle. I built mine inside the nacelle. Tony's way is much more practical. Apart from that I did not find any major problems with the landing gear. As the most complex of the whole kit they were interesting to build. My advice build a little scaffold around them while constructing the rest as they are flimsy. Least pressure & they snap

A warning Roger the mudguards on my instructions show them back to front. And guess who found out after putting the lot together.

A lot of problems with putting the fuselage together. Plus a lot of work put into filling & sanding both fuselage & the nacelles. But good practice & really worth it. In the end it turned out to be my best model so far. Luckily there are few panel lines which makes shaping & sanding a lot easier.

Laurie

[Guest]

Nice office Roger, love the old Mozzy myself.

John

[Guest]

Seems to be a very good kit?

Nice start and cockpit

Roman

[Guest]

Thanks for the replies.

It is encouraging to hear that there are known issues with the kit. At least it is not just me.

Something else I noticed later, on a scale of 1 (very easy) to 5 (well 'ard) it's a 5.

It is becoming apparent that it is a very detailed kit with some very nice features, but it is going to require some work. More when I get home this evening.

[Guest]

Love the Mozzie always remeber as a kid watching some war film were there are 3 or 4 of them flying so low over the sea and tree's must have been amazing to do and see obviously not if you were a german soldier.

Keep it up

Martin

[papa 695]

Great start Roger the cockpit looks fantastic

[Guest]

Episode three starts with a correction to episode two. I said that there were no dramas with the front end. Well, there were a couple, the bombsight and joining the two front halves of the fuselage together.

The bombsight is a very tiny fragile component and this is made worse by the fact that it is a transparency (guess who spent ages stairing at the grey sprues before they worked that one out), which seem to be more brittle than the coloured parts. I snapped it getting it off the sprue and glued it back together, then I snapped it again joining the two fuselage and this time the carpet monster got it.



I had to chamfer away quite a bit of the flight deck floor to get the fuselage sides to join and eventually got to the stage where if I had taken any more off, the nose transparency would be too large. At this point, there was still a gap between the two halves from the trailing edge of the hatch so I had to fill this,





The instructions suggest that the two rear halves of the fuselage should be joined together before joining to the front. Out of curiosity I taped up the rear fuselage and tried it. The former at the rear of the flightdeck fowled in it and bent. Unfortunately however, the front edge of the rear fuselage is smaller than the rear edge of the front fuselage. I decided instead to fit the two rear parts to the front parts and then bring them together at the tail and fill any gaps afterwards. This seems to have worked OK.



One of the things I like about the kit is that the wings sit on spars and the stabilizers on a flat former which goes through the fuselage so there is no guesswork in dihedral. The wings and stabilizers fit nigely against the fuselage.



Another nice touch is that the flaps are properly Fowlered. That is to say that instead of simply pivoting about an axis near to their leading edge the slide backward and downward which looks much better if you decide to model them deployed.



Assembly of the wings and other control surfaces is routine but do remember to open out the required mounting holes before you join the upper and lower halves of the wings.





In the next episode, the body count starts to rise fairly quickly.





Onward! :beer:

[flyjoe180]

Good luck with the rest of it Oggy, I'm enjoying your review as you go though, very informative. I love the Mosquito, look forward to seeing the completed product in due course.

[Guest]

Nacelles – the fun begins.



As I think I said earlier, there are two small but (nearly) perfectly formed Merlins.



These are made up of substantial parts which do need a little fitting to get rid of the gaps but do go together fairly well. I think they would be a great starting point for someone with some talent to do a bit of detailing on.





The “Gotcha” I fell for was to fix the exhausts to one of them. If you are going to have the engine exposed on both sides then this is fine, but I had decided I didn’t want to. If you want the engine exposed then you have to cut the relevant panels out of the nacelles. Because the exhausts route out and down from the engines it is just about possible to get one side through the nacelle but there is no way you can get the other side of the nacelle on. If you are not having the engine showing the simplest way is to put it in the goodies box and fit just the exhausts to the nacelle. If you do this, there is nothing to hold them in place so I used a bit of Blutack.*



The engines mount nicely on brackets which are set into the firewalls. There is another former toward the back of the nacelle. Both of these taper so if you put them into the two halves to the nacelle and peg it together they can migrate slightly out of place.



Another nigglet here – the distructions show the pins that hold the props on as being much longer than they are which does not help finding them on the sprues.



In the next exciting episode we get to the gear. Be afraid, be very afraid.



Here’s a taster.

















* My spell checker doesn’t like “Blutack” and suggests “Buttock”. Personally I would have thought this was overkill unless you are of a very light build.



Onward! :beer: