So I'm finally done with my 1/48 Su-11 Fishpot from Trumpeter. The kit went together fairly well without any major problems. The only real issue was the poor fitment of the cockpit tub inside the fuselage. The tub seems a tad too wide, which in turn causes a gap between the two fuselage halves if left unattended.
I manged to lose the left nose gear leg (probably to the vacuum cleaner), so I had to cut one out from a piece of sprue. It turned out OK, but far from perfect.
I like the "less is more"-philosophy, and I try to aim towards the realistic instead of the artistic side of modelling. I used AK Xtreme Metal aluminium for the airframe, with various Tamiya acrylics for the cockpit, landing gear etc. A light coat of AK Neutral Grey enabel based wash was applied as weathering. All in all, I'm reasonably satisfied with the result. Enjoy
[ATTACH]286398[/ATTACH] [ATTACH]286399[/ATTACH] [ATTACH]286401[/ATTACH] [ATTACH]286402[/ATTACH] [ATTACH]286403[/ATTACH]
I manged to lose the left nose gear leg (probably to the vacuum cleaner), so I had to cut one out from a piece of sprue. It turned out OK, but far from perfect.
I like the "less is more"-philosophy, and I try to aim towards the realistic instead of the artistic side of modelling. I used AK Xtreme Metal aluminium for the airframe, with various Tamiya acrylics for the cockpit, landing gear etc. A light coat of AK Neutral Grey enabel based wash was applied as weathering. All in all, I'm reasonably satisfied with the result. Enjoy

[ATTACH]286398[/ATTACH] [ATTACH]286399[/ATTACH] [ATTACH]286401[/ATTACH] [ATTACH]286402[/ATTACH] [ATTACH]286403[/ATTACH]
Comment