Hi All,
This is my completed Academy 1/72 Super Etendard.
I hope you all take the time to watch the reveal video as well as the timelapse build video. The timelapse video took me some time to complete but I really think it is very enjoyable.
Build Summary
This kits original molds are quite old - if my information is correct - it dates back to 1983. It is based on a kit from a company Sunny-Tri. For its age I must admit the detail is very good.
Although this kit is almost complete at the time I am writing this, the goal was to complete the kit OOB with spare seat belts PE. I have nearly done this. I did scratch build the detail in the front wheel well, as there was none there and a seam I could not remove, so I covered it in detailing. The kit has no cockpit detail, and I did not add any either, it does have a HUD display.
The kit was painted with Humbrol enamels. I did preshade with Tamiya Enamel XF-1. And some post shading was done as well by just lightening one of the dark colours with thinner.
Panel lines were done using a Copic Multiliner Pen with a 0.05mm tip in Sepia Colour - I wanted to keep the panel lines a bit lighter. Rivets were given a wash with Tamiya Panel Line Accent. Wheel wells were washed with Vallejo Weathering wash brown. Finally it was matte coated and the canopy was applied. There was a gap between the canopy and fuselage which was filled with Vallejo putty and brush painted over.
Build Thread
Final Reveal Video
[ATTACH]293517[/ATTACH]
Timelapse Build Video
Build Slideshow Video
Final Photos
[ATTACH]293514[/ATTACH]
[ATTACH]293516[/ATTACH]
[ATTACH]293519[/ATTACH]
[ATTACH]293520[/ATTACH]
[ATTACH]293521[/ATTACH]
[ATTACH]293523[/ATTACH]
[ATTACH]293524[/ATTACH]
[ATTACH]293522[/ATTACH]
[ATTACH]293525[/ATTACH]
I hope you all liked the post. As always, all comments welcome.
This is my completed Academy 1/72 Super Etendard.
I hope you all take the time to watch the reveal video as well as the timelapse build video. The timelapse video took me some time to complete but I really think it is very enjoyable.
Build Summary
This kits original molds are quite old - if my information is correct - it dates back to 1983. It is based on a kit from a company Sunny-Tri. For its age I must admit the detail is very good.
Although this kit is almost complete at the time I am writing this, the goal was to complete the kit OOB with spare seat belts PE. I have nearly done this. I did scratch build the detail in the front wheel well, as there was none there and a seam I could not remove, so I covered it in detailing. The kit has no cockpit detail, and I did not add any either, it does have a HUD display.
The kit was painted with Humbrol enamels. I did preshade with Tamiya Enamel XF-1. And some post shading was done as well by just lightening one of the dark colours with thinner.
Panel lines were done using a Copic Multiliner Pen with a 0.05mm tip in Sepia Colour - I wanted to keep the panel lines a bit lighter. Rivets were given a wash with Tamiya Panel Line Accent. Wheel wells were washed with Vallejo Weathering wash brown. Finally it was matte coated and the canopy was applied. There was a gap between the canopy and fuselage which was filled with Vallejo putty and brush painted over.
Build Thread
Final Reveal Video
[ATTACH]293517[/ATTACH]
Timelapse Build Video
Build Slideshow Video
Final Photos
[ATTACH]293514[/ATTACH] [ATTACH]293516[/ATTACH][ATTACH]293519[/ATTACH][ATTACH]293520[/ATTACH][ATTACH]293521[/ATTACH][ATTACH]293523[/ATTACH][ATTACH]293524[/ATTACH][ATTACH]293522[/ATTACH][ATTACH]293525[/ATTACH]I hope you all liked the post. As always, all comments welcome.
:thumb2:
Comment