Hi this is my next offering to the styrene god the Road Runner Hot Rod if you are going to build one of these there is a bit of flash but some of the seam lines are horrendous.
(I hope you don't mind me building a cartoon car in this section.)
Box art.

Parts.



Started with the air scoop by adding some missing casting lines, something like the one below.
[ATTACH]326904[/ATTACH]
Before.

After.

Next up is the exhaust down pipes which had very bad seam lines, removed the mouding between the two pipes using a piercing saw, added washer/nut to exh clamp.



The orange block fits inside air intake manifold.

The body bucket.

Rear axel and tras spring wich I added nuts.

The propshaft added some pivet pionts.

All parts that need painting in primer.

After looking at the model a bit closer I decided to make up some brake discs/callipers from spares box.
Rear brake discs/callipers.



Front brake discs/callipers.


Thank you for looking in.
Pete.
(I hope you don't mind me building a cartoon car in this section.)
Box art.

Parts.



Started with the air scoop by adding some missing casting lines, something like the one below.
[ATTACH]326904[/ATTACH]
Before.

After.

Next up is the exhaust down pipes which had very bad seam lines, removed the mouding between the two pipes using a piercing saw, added washer/nut to exh clamp.



The orange block fits inside air intake manifold.

The body bucket.

Rear axel and tras spring wich I added nuts.

The propshaft added some pivet pionts.

All parts that need painting in primer.

After looking at the model a bit closer I decided to make up some brake discs/callipers from spares box.
Rear brake discs/callipers.



Front brake discs/callipers.


Thank you for looking in.
Pete.
Comment