Suzuki gsx1100s first ever build !

[Bozzie82]

So I plucked up the courage to start my first ever build.

Didn’t have much time, after looking carefully through the instructions I can’t really add much more until I’ve primed and painted so that’s all for tonight !

[Bozzie82]

So now I’m wondering how on earth im going to prime these bits….I’ve nothing to grip so the whole part gets a coat.

What’s everyone’s method?

[Nicko]

I'd probably glue the barrels and cam cover onto the crankcases and then hold this on the side where you'll later attach the ignition or genny cover with a bit of blu-tac onto a wooden plant pot label or similar....

Nick

[Bozzie82]

I'd probably glue the barrels and cam cover onto the crankcases and then hold this on the side where you'll later attach the ignition or genny cover with a bit of blu-tac onto a wooden plant pot label or similar....

Nick

Did think about that however they’re a different colour when painted according to the instruction. Suppose I could mask and paint them.

[Mark1]

You could glue a bit of sprue to an area that isnt seen and cut it back flush after paint.

[JR]

That's a neat idea Mark

You could glue a bit of sprue to an area that isnt seen and cut it back flush after paint.

:thumb2:

[Ian M]

So now I’m wondering how on earth im going to prime these bits….I’ve nothing to grip so the whole part gets a coat.

What’s everyone’s method?

A pack of cocktail sticks are a good way out . Most things either have a hole you can push one in. If not one can be drilled somewhere it will be covered or hidden.
For larger parts bamboo bbq skueres with a crocodile clip on the end is handy. You can also get bbq pins that have a flat 'handle' at one end a blob of blue tac on that and press the part onto that.
A block of expanded polystyrene is good to stab the sticks in as a holder.

[Bozzie82]

A pack of cocktail sticks are a good way out . Most things either have a hole you can push one in. If not one can be drilled somewhere it will be covered or hidden.
For larger parts bamboo bbq skueres with a crocodile clip on the end is handy. You can also get bbq pins that have a flat 'handle' at one end a blob of blue tac on that and press the part onto that.
A block of expanded polystyrene is good to stab the sticks in as a holder.

You’re good! I’ve literally done what you’ve recommended!

Just ordered a cheap block and crocodile clips on sticks to make my life easier.

Just want to get cracking with the rest but it’s now a waiting game!

[Tim Marlow]

Blue tack is also useful for holding things while painting. Allied to wood blocks, cocktail sticks, or lolly sticks, you can arrange for almost anything to be held for painting Chris. Be aware that the serrated jaws on crocodile clips can sometimes mark the surface of parts. Smooth aluminium hair grips are better in this regard.
This sort of thing….

[PaulTRose]

i think cocktail sticks are the universal tool in modelling, a zillion uses.

[tigersteve]

Have fun - nice model to build !

[outrunner]

If there is a flat surface that will not be seen and there are no handy holes for a cocktail stick I often heat a bit of spue with a cigarette lighter until it just melts then stick it on the part. once it's painted just twist the sprue to get it off. Downside is, non smokers will have to buy a lighter.

Andy.

[Bozzie82]

Getting some parts primed and ready for painting.

[Bozzie82]

Sod it I got the airbrush out and had my first ever go! Bit of practice and then got the first piece painted. I’m happy with it.

[Tim Marlow]

Yep, looks good. Sometimes you’ve just got to grab the nettle and spray something :tongue-out3: