'heavey Metal' Cat D8h Dozer

[aaron]

This looks great Jim.

[yak face]

Love this Jim , as has been said its weathered perfectly , just the right amount of worn paintwork and dirt to show a busy ,well used machine. its a shame there arent more construction machinery kits , everyone seems to love them , they would be a big seller i'm sure. great job , cheers tony

[Guest]

Nice machine, well wheathered, cheers

[Guest]

Many thanks John, I use just plain water to thin for washes and such. These are the paints I use[ATTACH]142836[/ATTACH] about half a buck each and come in every imaginable color. One thing about them is that they have to be applied in many thin layers with an almost completely dry brush {for weathering} For metalizing I find that the good old Testors enamels to work best. Silver cut with some black and a hint of brown in some cases. Again dry brushing is a very tedious technique with washes being re-applied in stages and in varying hues and shades. this particular model needed to be built and weathered in various stages of construction and though the temptation to smack it together was strong prudence and patients had to be observed to get it the way I wanted it to look.
Thanks again for your kind words..........Cheers....Jim

Ah yes! I have been buying these too, at our local discount shop, a bit morte expensive here - £1, which is about $1.45 - but for 2 oz this is really cheap, and, as you say, a big selection of colours! I used them for my Panzer iii for the overall mud ground, before going in with the plaster of paris. They're good quality and I'm inclined to use them more. I suspect that folks here would find them invaluable for dioramas too!

[grumpa]

Ah yes! I have been buying these too, at our local discount shop, a bit morte expensive here - £1, which is about $1.45 - but for 2 oz this is really cheap, and, as you say, a big selection of colours! I used them for my Panzer iii for the overall mud ground, before going in with the plaster of paris. They're good quality and I'm inclined to use them more. I suspect that folks here would find them invaluable for dioramas too!

Yes and also they are so easy to work with once you get used to them, they cost a fraction of the model specific paints and besides there isn't a model shop within a hoot and a holler from where I am


and the nearest is over an hours drive and the proprietors are a couple of snooty bum-wipes imo plus there prices are astronomical. There's a Wal-Mart and a little craft store owned by the sweetest little old lady only a half hour away, that's how I roll.............Jim

[grumpa]

Love this Jim , as has been said its weathered perfectly , just the right amount of worn paintwork and dirt to show a busy ,well used machine. its a shame there arent more construction machinery kits , everyone seems to love them , they would be a big seller i'm sure. great job , cheers tony

Thanks Tony, there are a few about, kinda hard to track down but eventually I 'll find another, would like to stay with the 1/25 scale so they might sit with each other as a collection.


Maybe if the stars and planets align properly one day I'll procure another..............Jim

[Guest]

Yes and also they are so easy to work with once you get used to them, they cost a fraction of the model specific paints and besides there isn't a model shop within a hoot and a holler from where I am
and the nearest is over an hours drive and the proprietors are a couple of snooty bum-wipes imo plus there prices are astronomical. There's a Wal-Mart and a little craft store owned by the sweetest little old lady only a half hour away, that's how I roll.............Jim

I've been working away, using your method, on a large plastic milk bottle. Ok, so I primed it, but mostly to create an even base colour so I could see what was going on (that's my story, and I'm sticking to it). It'll come as no surprise to you that I achieved a beautiful, deep and rich Panzer grey, then an Olive drab, with a matter of about 5 coats. Totally smooth and you can still see the subtle texture that these milk bottles have through the paint. I then repeated the process, but using a couple of drops of Liquitex acrylic matte medium as part of the thinner, just to see if it made any difference. It did, but it was subtle, slightly less wet in consistency and it acted a bit like a wetting agent, or flow improver. Either way, I can now, finally see what you are doing and how you are doing it!


I'm now going to see how this plays out over fine surfaces like engine grilles, but if I keep the brush dry, it should be fine. My last test is gonna be trying Liquitex retarder in this mix, as I do love the ability to make adjustments after a few minutes! I raise my glass to you Jim!

[geegad]

thats a cracking build and the paint work and the weathering is spot on buddy top marks

[grumpa]

I've been working away, using your method, on a large plastic milk bottle. Ok, so I primed it, but mostly to create an even base colour so I could see what was going on (that's my story, and I'm sticking to it). It'll come as no surprise to you that I achieved a beautiful, deep and rich Panzer grey, then an Olive drab, with a matter of about 5 coats. Totally smooth and you can still see the subtle texture that these milk bottles have through the paint. I then repeated the process, but using a couple of drops of Liquitex acrylic matte medium as part of the thinner, just to see if it made any difference. It did, but it was subtle, slightly less wet in consistency and it acted a bit like a wetting agent, or flow improver. Either way, I can now, finally see what you are doing and how you are doing it!
I'm now going to see how this plays out over fine surfaces like engine grilles, but if I keep the brush dry, it should be fine. My last test is gonna be trying Liquitex retarder in this mix, as I do love the ability to make adjustments after a few minutes! I raise my glass to you Jim!

Glad you're getting the hang of it, just keep at it and you'll find you don't need any of that fancy stuff...............Jim

[Guest]

Truly awesome pops. I see you got better with the camera :P

[flyjoe180]

Hey Jim, not sure why or how I missed this one but brilliant work. Nicely finished to your usual high standards, and very well presented and photographed. Great build all round.

[grumpa]

Hey Jim, not sure why or how I missed this one but brilliant work. Nicely finished to your usual high standards, and very well presented and photographed. Great build all round.

Thanks Joe, I enjoyed this one, would love to get my hands on more of them but there aren't many around.................Jim

[Guest]

Truly a masterpiece Jim, put mine to shame, truly outstanding.


John

[grumpa]

Truly a masterpiece Jim, put mine to shame, truly outstanding.
John

Thanks a bunch John, wish I can find other 1/25 construction equipment but they are hard to find..............Jim