Project 1/8 Thunder Tiger EB4 S2 Rally Game

[dynamite25]

These are the parts you will need to convert an S2 buggy in to a S2 Rally Game and I have also added online shops that have the parts in stock.

PD1052 1/8 Rear Body mount - Anticsonline have this but only at one of the stores but you might be able to order it online and they could send it from the store but I would ring to ask them if they could do that.

Thunder Tiger 1/8 Rear Body Support Set (PD1052) | Antics Online Model Shop

PD0691 Body Support Set - Thunder Tiger RG Spare Body Support Set Rally Game (PD0691) | Antics Online Model Shop

PD1787 Front Bumper Mount - Thunder Tiger PD1787 Front Bumper Mount RG (Rallygame): Amazon.co.uk: Toys & Games

PD1788 Sponge Bumper - Thunder Tiger RG Spare Foam Bumper EB4 Rally Game (PD1788) | Antics Online Model Shop

PD0687 Centre Solid Axle

AD0363 46T Plastic main gear

But if you can get a Version 1 S2 buggy you won't need to buy PD0687 and AD0363 as the Version 1 S2 came with one as I would of got an S2 version 1 if I had know that before I got the S2 Buggy off ebay,but never mind I got the Centre solid shaft and main gear in the end just can't fit it yet as I need threadlocker for the brake bolts as I don't want to remove the centre mount twice.

[Guest]

Thanks for the information and also looking for some stock, most appreciated. Some of the Antics stores are quite close to me as I live in the South West and work in Bristol.

Took the S1 RG out this morning and snapped a front knuckle.. luckily I have some spares of those.

Mark.

[dynamite25]

Hi mark two items are at there internet and mail order centre and and the other is at there Antics Model Shop (Gloucester),so you could go to your local antics store and see if they can get those parts sent to them so you can buy them there as it's worth a try to see if they will.

I'm hoping to get another EB4 S2 buggy for spares next weekend off ebay if there is one cheap enough as it's cheaper than try to buy the parts separate.

[dynamite25]

Finally got the rest of the parts to complete my S2 Rally Game plus some spare parts in case I break anything when I start using it,and today I bought an S1 Rally Game rolling Chassis without engine and controls as Spares for my S1 Rally Game as parts for it are hard to find and was glad to find this on Ebay.

So I have got spares for both cars now.

And I am looking forward to getting out and using them both.

[Guest]

Hi steve

i know this post is a couple of months old but i am dumb founded and i dont know how to use these forum its my first time whitch makes this even worse. but i just recently bought 1/8 scale nitro rc car uesd it has the same body shown in the first pic but it has been cut for the wheels space no biggy everything looks the same as the first car you have in the first couple of pics for the red chassie everything but the motor is 21p so i am not sure what car i have but i think its the S2 ok heres my problum i drove it onces and broke the front knuckle bought a new one from tower hobbies but found a hop so i got those comeing so its fixed again but the pull start houseing was missing some screws and like a dumb monkey i took it apart and its trash so now i dont have a way of starting the car that being said i went and got a starter box and come to found out that the starter box rubber flywheel is to big to ingage the flywheel on the car the hole on the chassie is to small please can you help me and give me any information on what i can do to start my rc car again

Thanks

if you want pics let me know

sorry for the long post and spelling

[Guest]

Hey, has anyone had any luck with finding a decent body for the S1? I found the damn thing in the trash and fixed it up. It runs great but it is a pain in the ass to clean because of running it without the body. I'm trying to hook it up so my little brother can learn with it.

Thanks.[ATTACH]90885.IPB[/ATTACH]