How I Build Dioramas in 1/16th.

[Guest]

The copper fuel tank is not in its final position but has been lowered to rest on the engine support beam.I left the tank fitting in a unusual place on the tube to indicate this.The fuel tank can easily be positioned higher, to its final gravity feed position ,when all the fittings etc ... are installed.(after he returns from the war)

The prop will not be installed because something as valuable as that (if he even had one)would not be left outside.

Next?

[Guest]

Making windows Well I think that I will go back to woodworking for awhile.Ken Hamilton has a great tutorial on making windows which I will borrowing from extensively.It is a really great step by step method using a jig and real glass or plexiglass.

The facade will play a secondary role in the diorama but in reality it represents a good portion of the overall work involved.I have to be careful here that I don't get too fancy with the facade.I thought about shutters but it would just be too much.Luckily this is a backyard which would not normally have any anyway.

I will build a few until I get tired of it and then return to the flier somewhere down the road.

[Guest]

[Guest]

Talk about going from one extreme to another! From aircraft engine to windows.On a long project like this you have got to keep learning something new.Dioramas provide lots of room for learning and is one of the main reasons I do them.

The above pic is Ken Hamilton's almost finished window.Mine of course will be an exterior window so therefore will be a little different but basically it will be his methodology that I will be using.

Looks simple doesn't it? and I guess like most things it is after you have done the first one but you would be surprised just how much planning goes into it.(thanks Ken)

Well here we go!

[Guest]

[Guest]

Windows The above pic was taken with a flash so the facade looks washed out.

The window jambs have already been installed so I will be required to build each window right on the facade rather than in a jig.I used 1 inch insulation and then wound around a large rubber band in order to get the facade to lay flat .Over the facade I have placed a cardboard sheet to protect the brick and then cut a hole in it for the window to be worked upon.

[Guest]

deleted pic

[Guest]

[Guest]

[Guest]

The above is a fully working window that slides up and down .I make mine from wood but plastic could also be used.The window panes are 1/16th Lexan that I cut from a sheet and then with a fine blade in my scroll saw,I cut out the rough shape .I then use a small belt sander with fine sandpaper to trim the rest.Any further shaping that is required to fit the panes into the individual window openings is done by using hand sanders.

The end on view gives you a good idea of how the whole thing is put together.

[Guest]

[Guest]

[Guest]

Now I have just another 11 windows and two doors to build.The way it is going more time will be spend on making up the supporting cast than the main event! But I expected this,I guess it is a lot like the movies where lots of time and money is spent on scenery in order to make the storyline more believable.

I think in future I will do only small 1/16th vignettes a la my fellow modeler Chuck Doan.I will spend more time on detail and less on big scale(size) productions.Four large dioramas is three more than I originally set out to do anyway.

The following is an example of Chucks work which I call extreme weathering .A great theme for example ,would be a modern day barn-find of an old aircraft or even aircraft parts, in 1/16th scale.It would give me lots of opportunity to give extreme weathering a try.I really enjoy the weathering process and then taking pics of the detail.

In the following example the old barn window tells a whole story in itself.

[Guest]

[Guest]