How I Build Dioramas in 1/16th.

[Guest]

[Guest]

[Guest]

Weekend Summery. This week was all about making and weathering fencing.It can be a long and repetitive process but you can make it less so by being a little creative and making each section just a little different.

The sections are made to be removable until final assembly .I build each panel as it would be done in full scale and do not use jigs.This way it allows for a build which is more like the real thing,mistakes and all.Posts are installed first ,followed by cross members and then the vertical boards.Weathering is the same method as I used for the barn siding in my other dioramas.I figure that most fences in middle class neighborhoods in those days would be left to age naturally, due to the cost of paint.

In the original picture the fencing looks to be about 4feet internally and the outer perimeter about 6 feet or higher.(My mock shows all the fencing at 4feet.)I decided to go with the picture and use the higher perimeter fencing.The only problem that I can see now would be to make the whole thing look a little walled off from the viewers perspective.If need be the height could be reduced in he future.

[Guest]

[Guest]

Yeah,I know it is not WW1 but all by old Ford T's are in the dioramas.Anyway this gives you an idea of how easy it is to do a vignette composition.I used my own backyard as a backdrop, put in a 1/18th scale classic car along my recently built fence,used one of the hangar doors not yet installed and voila there you have it.Later of course this area will be covered in grass and other vegetation.The car could also be slightly weathered, especially around the wheel areas after a drive to the airport, or I could put in a pail and some soap indicating that it had just been washed.

[Guest]

[Guest]

[Guest]

Weekend Summary Still on the fencing! I have decided to rearrange things a bit.The high fencing will extend along only one side of the backyard that faces the street.The front fencing will be the same height as the fencing that separates the backyards, as it faces the lane way out back and not the public street.I felt that using the high fencing all the way around would give the diorama a walled off look which is not very welcoming for the viewer.The high wall is located at the highest elevation of all the backyards, so I think it actually adds to the stepped down look when viewing the diorama from right to left.

The exact position of the flier I am still debating.The original reference pic shows it square to the fence with the nose pointed toward the buildings facade.Because the backyards are not square to the base but at an angle,I may still be OK with this.

How to get the finished airplane out of the backyard ? Well he wouldn't be the first EAA type to tear down a fence to remove his beloved airplane.(I have heard of some who even removed basement walls)

[Guest]

I am tired of the fencing business for now and am ready for something new.Like with most things new it can be a little intimidating at first but I feel that I have some excellent reference material to work with so I am anxious to get started.

This will be my first attempt at a building other than a barn or old hangar.It will only be the rear facade but it will be my first go at brickwork,stone etc..A modeling bud ,Andi has been most helpful to me in getting started with reference material and a building methodology using foam board and paper.You will be amazed at what can be done with paper ,I know I sure was.Well here goes.......

[Guest]

[Guest]

Duplipost

[Guest]

More fun with vignettes While I am working on the early stages of building the facade,I thought that I would put up a few pics of the crashed Albatros sitting in the backyard of the backyard flier diorama.(lots more on my photobucket,look for the Albatros album.)When the backyard is finished with all the landscaping in place,I will submit better pics without clothes lines , bird feeders,porch railings and sun canopies etc... Eventually I will be taking a lot of pics of my 1/18th scale old car collection using this backyard, before shipping it off to the museum.

__________________

"Once upon a time......." Storyboard dioramas by JohnReid.

My photobucket:

Pictures by JohnReid - Photobucket

[Guest]

[Guest]

[Guest]