Snorkeling off a Saipan beach......The Players.

[Tim Marlow]

Looking well aged and marinated now.

[spanner570]

Thanks Tim.

On with the L.C.
Me being a Founder member of the 'Cheapskate Model Making Society', I've decided that instead of wasting money on a proper 1/72 L.C. kit, only to cover it with all sorts of horrid marine growth, I'm going to make the vessel out of a cardboard cereal packet. Should be fun, as I've never done such a thing before.

I found a basic drawing of an L.C. on 'tinternet, so I've scaled it to 1/72, then drew it out on paper and transferred these to the cereal packet and cut out the shapes needed.

I've learned from my somewhat limited knowledge of cardboard/paper kits that just gluing the edges together is not strong enough, so I've made me some strips of thin card 'Gussets' suitably adorned with dart cut outs. Glued to the edges of the cards, these allow for the flexing of the joints in both directions.....

The ramp(top left) is made from plastic card because I tried cardboard and was unable to cut out the slats neatly enough.



Some of the angle strengthening gussets.


Should be interesting.......:thinking::upside:

Igor A. Gusitortoo

[Jim R]

Hi Ron
I'll bet you got a Blue Peter badge in your youth. Do you still have a Tracy Island in the loft?? :rolling:
Crud covered airyplane looks suitably derelict. A card Landing Craft :thumb2: There's a bit of a foodie theme to the Ron school of modelling - pizza bases a year or so ago and now you've moved on to cereal boxes. My guess is you're already saving baked bean tins for some future project!
Jim

[The Smythe Meister]

'Crud' added.
[ATTACH=CONFIG]n1157612[/ATTACH]

[ATTACH=CONFIG]n1157613[/ATTACH]

[ATTACH=CONFIG]n1157614[/ATTACH]

That will do for the aircraft. I'll add a bit of colour and weed later.

Next, I'll tackle the L.C.

Thanks for looking.

Ron

Looking most excellent Ron ,
You`ve got that look perfect..... just like that Documentary prog where they peel back the sea to show wrecks:thumb2:,
Top stuff mate,
Andy

[scottie3158]

Ron,
Looking great as always always unbelievable results with the most basic or materials. Still if you have great imagination and skill all is possible.

[JR]

570 as a keen follower of your work I think this is great. What carboard packet are you using please, or will any make be suitable. You must of course have a strong gusset.

453 president of the South Lincs Gusset appreciation society :smiling3:

[spanner570]

Thanks to Jim, Andy, Paul and 453 for your humorous and encouraging comments.

Jim. Baked Beans tin. That's a co-incidence. I have to try and model a reason why the L.C. is sunk'd.

Andy. We haven't a t.v. It's missing things like this when I wish I had....

Paul. 10% each and the rest sheer luck!

Dear Mr. President 453. Thank you for your enquiry regarding what cardboard packet I'm butchering.
Here is a picture of what remains of same.....


Names have been obliterated to protect the innocent.

Should you wish to use the same or similar, please ensure the inner bag is empty. I didn't, and simply nicked the outer one from the wife. Bad move!

I am now once more under the tender care of our Matron. She reckons my wounds will heal with no scars to show as a result of my forgetting to ask permission from the present Mrs. Ron before cutting up her cereal packet

Hello Matron...Well, can't the bandage removal wait until I've finished typing this to........AAGGG!

[Tim Marlow]

If you think the bandages are bad, wait until she gets to your catheter…..

[spanner570]

.............wait until she gets to your catheter…..

She'll be disappointed when she gets there these days. Just like the wife is!

[JR]

570 Thank you for your enlightening post re the make and type of cardboard.
Sorry to read of your matrimonial problems. Mind taking the inner lining as well was rather fool hardy , esp knowing of the present Mrs 570's ability to throw.
Chris Boatman knows fully well the danger of taking certain things as well.
Yours 453 .

[spanner570]

My pleasure 453.
....and now back to the mundane model making.

I've just realised, I haven't written what type of L.C. I'm roughly copying. It's the L.C.M. III (M for mechanized) These vessels were much used both in the European and the Pacific theatres. All metal construction, they were designed to carry up to 30 tons. Either 1 tank, 60 soldiers or a general cargo. Over 8600 were built.


Being reasonably happy with the dry fit of the bits for my 'Blue Peter' Landing Craft, I've made a start sticking it all together.

Here's one of the hull sides stuck to the bottom of the L.C. See how cutting out the darts has allowed me to bend things easily to the right shape.

....a tip. If you are contemplating such a procedure, don't try and glue the whole strip in one go. Glue one end, let this dry. Then gradually work your way along the join, shaping the profile as you go.



Cheers.
Igor A. Gloostik

[boatman]

570 Thank you for your enlightening post re the make and type of cardboard.
Sorry to read of your matrimonial problems. Mind taking the inner lining as well was rather fool hardy , esp knowing of the present Mrs 570's ability to throw.
Chris Boatman knows fully well the danger of taking certain things as well.
Yours 453 .

:thinking:YEA John i do wont do that again in a hurry to exspensive for me an danger to crown jewels lol:rolling::face-with-head-bandage::cold-sweat:
chris

[boatman]

My pleasure 453.
....and now back to the mundane model making.

I've just realised, I haven't written what type of L.C. I'm roughly copying. It's the L.C.M. III (M for mechanical) These vessels were much used both in the European and the Pacific theatres. All metal construction, they were designed to carry up to 30 tons. Either 1 tank, 60 soldiers or a general cargo. Over 8600 were built.


Being reasonably happy with the bits for my 'Blue Peter' Landing Craft, I've made a start sticking it all together.

Here's one of the hull sides stuck to the bottom of the L.C. See how cutting out the darts has allowed me to bend things easily to the right shape.

....a tip. If you are contemplating such a procedure, don't try and glue the whole strip in one go. Glue one end, let this dry. Then gradually work your way along the join.

[ATTACH=CONFIG]n1157670[/ATTACH]

Cheers.
Igor A. Gloostik

COMIN on well that LCM is 570

[adt70hk]

Thanks Tim.

On with the L.C.
Me being a Founder member of the 'Cheapskate Model Making Society', I've decided that instead of wasting money on a proper 1/72 L.C. kit, only to cover it with all sorts of horrid marine growth, I'm going to make the vessel out of a cardboard cereal packet. Should be fun, as I've never done such a thing before.

I found a basic drawing of an L.C. on 'tinternet, so I've scaled it to 1/72, then drew it out on paper and transferred these to the cereal packet and cut out the shapes needed.

I've learned from my somewhat limited knowledge of cardboard/paper kits that just gluing the edges together is not strong enough, so I've made me some strips of thin card 'Gussets' suitably adorned with dart cut outs. Glued to the edges of the cards, these allow for the flexing of the joints in both directions.....

The ramp(top left) is made from plastic card because I tried cardboard and was unable to cut out the slats neatly enough.

[ATTACH=CONFIG]n1157642[/ATTACH]

Some of the angle strengthening gussets.
[ATTACH=CONFIG]n1157643[/ATTACH]

Should be interesting.......:thinking::upside:

Igor A. Gusitortoo

Great idea Ron. Have been following this with interest.

Keep it up.

Andrew

[Jim R]

Hi Ron
All joking aside for a moment the cardboard LC looks as if it will work well. You do indeed only need a basic shape when it is covered in seabed crud. The crud/paint will need to be put on pretty dry so the card doesn't distort.
Jim