HI GUY'S !
Just like the title said ..I been working for a while on this project I have completed 89 AVRO CANADA projects so far and still a couple to do before I move on to another project ..So here below what on my work bench at the moment.. Remember all projects are done in 1/48 scale ..I work on this project on a weekly base so be ready for some update .. Note due of picture limitation I have created a page on google for each projects where you will be able to view where I'm at on each of them .So here they are
# 1 AVRO DTV (Delta Test Véhicule )
(MAY 06th) so far I have created the phase 1 and 2 DTV and rocket booster , I'm working on the launcher now
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
#2 1/10 AVRO ARROW FLUTTER test model
(MAY 06th) So far the basic work on the model is done and I'm working on the decals and last details
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 3 .....AVRO CF-105 ARROW MACH 2 WOODEN MUCK-UP
(MAY 06th )So far it's almost done, what left are last details and scratch the nose radar , last work was retouching the nose paint and complete the main gear door and glued it into place
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 4...ASSEMBLY JIG
(MAY 06th).. the main JIG is completed, what I'm working on now is adding details and created the assembly buggies that hold the main parts , last work I done was creating a metal shelving unit and advance the middle fuselage section buggy
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 5 MASTER MOLDS
(MAY 06th).. So far I have created pieces and prepare the presentation , at the moment I done the last work on the FUSELAGE TOP PLATING MOLD and created a working table that will be display shortly on the presentation base
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 6 OPEN / CLOSE CANOPY TEST JIG JIG
(MAY 06th ) I'm almost true with the jig itself, the last work I done was creating the opening/closing mechanism
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 6 OURANDA IROQUOIS ENGINE
(MAY 06th) So far the engine basic work is done, I'm now at detailing the mid section !
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 7 AVRO CF-105 INFORMATION CENTER
(MAY 06th) So far I have created several small section and I have yet to determine the size of the presentation I will need , the last wrok I done was the INTAKES and EXHAUST covers
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 8 ARRESTING HOOK proposition for ARROW MACH 2
(MAY 06th) So far I'm almost true with the engine section that will hold the head of the hook and action mechanism
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 9 FALCON MISSILE JIG proposition
(MAY 06th) I have done the basic work on the jig last work was creating the legs to hold it
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
#10 CF-15 ARROW TOW TRUCK
(MAY 06) the main body is done on both version , the last work was on the front grill of the first version
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 11 Jeep M.38 GÉNÉRATOR
(MAY 06th) .Using the REVELL jeep , I made the necessary modification, I,m at completing the back doors
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 12 WHITE 3000 gaz truck
(MAY 06th) So far using the REVELL kit , I have modified the frame and Im on creating the back section
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
#13 disassemble of the ARROW # RL-205
(MAY 06th) The RL-205 is completed , the presentation base is prepared and I'm now creating all the wings disassemble parts
Si vous désirez voir le montage intégrale visitez ce lien Google
(MAI 06) Cette semaine j'ai pris une pause sur ce projet !
Enjoy ..
Jmarc
Just like the title said ..I been working for a while on this project I have completed 89 AVRO CANADA projects so far and still a couple to do before I move on to another project ..So here below what on my work bench at the moment.. Remember all projects are done in 1/48 scale ..I work on this project on a weekly base so be ready for some update .. Note due of picture limitation I have created a page on google for each projects where you will be able to view where I'm at on each of them .So here they are
# 1 AVRO DTV (Delta Test Véhicule )
(MAY 06th) so far I have created the phase 1 and 2 DTV and rocket booster , I'm working on the launcher now
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
#2 1/10 AVRO ARROW FLUTTER test model
(MAY 06th) So far the basic work on the model is done and I'm working on the decals and last details
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 3 .....AVRO CF-105 ARROW MACH 2 WOODEN MUCK-UP
(MAY 06th )So far it's almost done, what left are last details and scratch the nose radar , last work was retouching the nose paint and complete the main gear door and glued it into place
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 4...ASSEMBLY JIG
(MAY 06th).. the main JIG is completed, what I'm working on now is adding details and created the assembly buggies that hold the main parts , last work I done was creating a metal shelving unit and advance the middle fuselage section buggy
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 5 MASTER MOLDS
(MAY 06th).. So far I have created pieces and prepare the presentation , at the moment I done the last work on the FUSELAGE TOP PLATING MOLD and created a working table that will be display shortly on the presentation base
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 6 OPEN / CLOSE CANOPY TEST JIG JIG
(MAY 06th ) I'm almost true with the jig itself, the last work I done was creating the opening/closing mechanism
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 6 OURANDA IROQUOIS ENGINE
(MAY 06th) So far the engine basic work is done, I'm now at detailing the mid section !
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 7 AVRO CF-105 INFORMATION CENTER
(MAY 06th) So far I have created several small section and I have yet to determine the size of the presentation I will need , the last wrok I done was the INTAKES and EXHAUST covers
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 8 ARRESTING HOOK proposition for ARROW MACH 2
(MAY 06th) So far I'm almost true with the engine section that will hold the head of the hook and action mechanism
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 9 FALCON MISSILE JIG proposition
(MAY 06th) I have done the basic work on the jig last work was creating the legs to hold it
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
#10 CF-15 ARROW TOW TRUCK
(MAY 06) the main body is done on both version , the last work was on the front grill of the first version
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 11 Jeep M.38 GÉNÉRATOR
(MAY 06th) .Using the REVELL jeep , I made the necessary modification, I,m at completing the back doors
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
# 12 WHITE 3000 gaz truck
(MAY 06th) So far using the REVELL kit , I have modified the frame and Im on creating the back section
If you like to view the complete WIP on this project , I have set-up an Google page for it ,on GOOGLE ,here the link:
#13 disassemble of the ARROW # RL-205
(MAY 06th) The RL-205 is completed , the presentation base is prepared and I'm now creating all the wings disassemble parts
Si vous désirez voir le montage intégrale visitez ce lien Google
(MAI 06) Cette semaine j'ai pris une pause sur ce projet !
Enjoy ..
Jmarc
Comment