I built that recent diddy 1/144 Spitfire so I could have a stab at Ray Hanna flying his Spitfire under a certain bridge.
Here goes.....
Bridge first.
As usual, I draw the outline of the subject on to a piece of paper, then transferred the cutout onto a bit of foam board and then cut the board.
This is my first attempt. I even scribed the stonework onto one of the boards. Luckily, I only need to detail one side of the bridge. I then discovered the bridge arches I'd cut were way off. I tried to correct it, but to no avail.
So under my boot it went (sort of)
The master plan!

Onto the board

Under my 'Boot'

I was not going to be beaten by a bit of paper and a dumb first attempt, so I set to with a will this morning.
Here's the Mark II. Much better shape.

The bridge stonework is very thin and random

Anyway, we are now off and running.
Cheers.
Thomas Telford II
Here goes.....
Bridge first.
As usual, I draw the outline of the subject on to a piece of paper, then transferred the cutout onto a bit of foam board and then cut the board.
This is my first attempt. I even scribed the stonework onto one of the boards. Luckily, I only need to detail one side of the bridge. I then discovered the bridge arches I'd cut were way off. I tried to correct it, but to no avail.
So under my boot it went (sort of)
The master plan!
Onto the board
Under my 'Boot'
I was not going to be beaten by a bit of paper and a dumb first attempt, so I set to with a will this morning.
Here's the Mark II. Much better shape.
The bridge stonework is very thin and random
Anyway, we are now off and running.
Cheers.
Thomas Telford II
Comment