Scale Model Shop

Collapse

DIY project - railway sleeper garden wall

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    DIY project - railway sleeper garden wall

    When we had our extension built, part of the building regs stated we had to build a retaining wall 1M back from the house. We've never really had the time to get it done so obviously now was ideal.

    So over the holiday weekend while Zoe wasn't working, we got to digging. Pretty much filled an 8 Yard skip so there was quite a lot taken out!

    [ATTACH=CONFIG]n[/ATTACH] [ATTACH=CONFIG]n[/ATTACH]

    On Monday morning these arrived. Delivery was quite a faff since we'd had the road dug up outside out house after a power cut, so we had to hand ball them off the truck and onto the drive, then back garden.

    [ATTACH=CONFIG]n[/ATTACH]

    After 2 days in the blazing sun I've lost about a Stone but we have something resembling a wall. I'm sure you pro's will spot plenty of flaws in my handiwork but for my first time doing this kind of thing I'm quite happy. Timber work is pretty much finished but the slab steps need levelling out (with a slight forward slope to let the water run off). I went for slabs as I had a few left over, and I've that heard sleeper treads can be slippery when wet. It'll take time but I'm hoping the sleepers will weather and soften a bit, hopefully blending with the fence.

    [ATTACH=CONFIG]n[/ATTACH]

    [ATTACH=CONFIG]n[/ATTACH]

    [ATTACH=CONFIG]n[/ATTACH]

    [ATTACH=CONFIG]n[/ATTACH]

    Rest/modelling day tomorrow I think, then I'm putting some weed membrane behind the wall and backfilling with soil. I'll also need to level the grass off with the top of the wall in places, didn't realise how up & down it was until the flat topped wall went in!

    Gap between wall and house will be levelled off, membrane put down, then some kind of gravel when SWMBO decides which one she wants :rolling:
  • Mini Me
    SMF Supporters
    • Jun 2018
    • 10711

    #2
    Cracking build Andy! What scale is it?:tongue-out3:

    Comment

    • yak face
      Moderator
      • Jun 2009
      • 13837
      • Tony
      • Sheffield

      #3
      Excellent job andy , looks brilliant . Sleepers make a great retaining wall , I got the old, creosoted reclaimed ones for mine , theyll never rot! cheers tony

      Comment

      • Guest

        #4
        Cheers Guys.

        I considered reclaimed ones Tony but decided against it. These are pressure treated and I gave them another coat of "stuff", especially on the cut ends, so hoping they'll do for at least 10 years.

        Comment

        • yak face
          Moderator
          • Jun 2009
          • 13837
          • Tony
          • Sheffield

          #5
          Originally posted by Paintguy
          Cheers Guys.

          I considered reclaimed ones Tony but decided against it. These are pressure treated and I gave them another coat of "stuff", especially on the cut ends, so hoping they'll do for at least 10 years.
          I’ve had mine in for about ten years now Andy , and to be honest it’s only the last couple of years that the creosote smell faded !:smiling5:

          Comment

          • Guest

            #6
            Finally our gravel has arrived so I can post "completed" pictures. Not something I do very often :smiling5:

            First thing was to put down some heavy duty weed membrane. The slab is levelled on a bed of sand underneath the fabric.



            And a 1 ton bag of cheap pea shingle/ beach gravel later



            I'm sure we won't win any garden design awards for it lol, but it does the job, ensures proper drainage, and the multiple colours will look okay once it has rained a few times to clean the stones up. We very rarely walk on this part anyway, so the annoying crunch you get with gravel won't be an issue.

            And here's another view showing my model making shed. You can see just how low it is compared to the small one next to it. I can't even stand up straight in it so most of my spraying takes place with me kind of stood up and stooped over. Hopefully that will be my next DIY project, as I deconstruct it and rebuild with better headroom and some decent insulation to keep it frost free in the winter, less than sweltering in the summer, and add some natural light.

            Comment

            • grumpa
              • Jan 2015
              • 6142

              #7
              Oh, to have the spunk to do such a project!
              I moan about cutting the lawns, and I'm just sitting on my a##.

              Great job on it, nice and straight and clean. :thumb2:

              Jim.

              Comment

              • PaulTRose
                SMF Supporters
                • Jun 2013
                • 6460
                • Paul
                • Tattooine

                #8
                Originally posted by Paintguy
                Cheers Guys.

                I considered reclaimed ones Tony but decided against it. These are pressure treated and I gave them another coat of "stuff", especially on the cut ends, so hoping they'll do for at least 10 years.
                these are also at least half the weight of reclaimed ones.......i did similar years ago, damn near killed me lifting them, and there was 2 of us!......but they will last for donkeys years......left that house 14 years ago and i know they are still there
                Per Ardua

                We'll ride the spiral to the end and may just go where no ones been

                Comment

                • Ian M
                  Administrator
                  • Dec 2008
                  • 18266
                  • Ian
                  • Falster, Denmark

                  #9
                  Nice tidy job that. Looks great.
                  Group builds

                  Bismarck

                  Comment

                  • Guest

                    #10
                    Thanks chaps.

                    A relatively simple project but it's much better than the weed infested ditch we had before!

                    Comment

                    • JR
                      • May 2015
                      • 18273

                      #11
                      Its gets a 10 from me Andy, a grand job, Id be pleased to have done that myself !

                      Comment

                      • Guest

                        #12
                        Thanks John. We're just waiting for the grass to recover now. I've top dressed & seeded a few bare areas so hopefully it'll sort itself out soon.

                        Comment

                        • JR
                          • May 2015
                          • 18273

                          #13
                          Originally posted by Paintguy
                          Thanks John. We're just waiting for the grass to recover now. I've top dressed & seeded a few bare areas so hopefully it'll sort itself out soon.
                          It will next week with the weather we have coming, you got this done right on time Andy.

                          Comment

                          • Peter Gillson
                            SMF Supporters
                            • Apr 2018
                            • 2594

                            #14
                            Nice job Andy.

                            i used similar sleepers to make some raised beds, and can vouch for how heavy they are!

                            Peter

                            Comment

                            • adt70hk
                              SMF Supporters
                              • Sep 2019
                              • 10406

                              #15
                              We done Andy!

                              Comment

                              Working...