Allen's (V2) F-108 Cable Reel Trailer for SimonT

[Steve Brodie]

watching with intent :-)

[JR]

Late in sorry been scribing bricks !
I shall take a seat near the front Dude1.

[rtfoe]

Ah! The Das Werke tonic does work doesn't it and you can't have too many scalpels can you, Allen. Chances of a bleeder is imminent. I'll be the one sitting with the raincoat expecting squirts of red liquid. This is going to be an epic scratch.

Cheers,
Richard

[JR]

This should do Richard. :nerd:

Ah! The Das Werke tonic does work doesn't it and you can't have too many scalpels can you, Allen. Chances of a bleeder is imminent. I'll be the one sitting with the raincoat expecting squirts of red liquid. This is going to be an epic scratch.

Cheers,
Richard

[Mini Me]

Are you telling me Allen is not to be trusted with "SHARP" objects?? I had no idea the man was a menace to himself......perhaps instead of first aid supplies we should all chip in and buy him a supply of "rubber" scalpel blades!! :tongue-out3: :tongue-out2::tongue-out::rolling::thumb2:
Rick H.

[Allen Dewire]

Evening fine folks and crazies around the world,

Thanks so much for your support and humorous comments. OK, so I'm old and shouldn't be given sharp objects either, but hey.......

I did take a good look at the Das Werk kit and, uhhh, Mmmm, it's not too shabby. Soft, real soft plastic and flash where you don't need it to be. If I get a chance and a good pic, I'll show you what I mean in a post later........Now,

Lee, You probably could do one easy enough, but you have to have 16 identically sized compartments and of course cable reels. Lots of them and in 1/48 they are hard to find unless you buy 10 Tamiya 88's with the Hanomag SS-100 kits. Expensive Buddy!!!

Fernando, Don't worry my friend, gonna get it right this time. I have a plan and a big box of bandaids too...

Paul, I do too and they have great subject matter. This one looks to be molded by Takom or Border...

Andrew, Don't worry Sir, the beer is actually for after I do something right on the build. Probably won't even get to drink one....

Steve, Glad to have you looking in. The real fun will begin in a week due to another commitment....

Dude 2, A rather iffy excuse Bro! I think you've been goldbricking myself. And FYI, I don't have an iPhone, so the list is a moot point!!!

Richard, Easy my friend. The only red stuff flying around will be Limes Strawberry schnapps. I actually do use all 5 knives and each one has a special purpose. One for etch, one for cutting the sprue nibs off, one with the blue blade holder for scaping and the other for scoring lines. Of course, the big one is for...............Dang, I forget........

Rick, Ok, so we now have 10,007 comedians out of work, but that was a good one!!! My mom used to call me a menace when I was like 8 or 9. I still wonder why...............

Prost
Allen

[scottie3158]

Allen,
I'm in my friend really looking forward to this. the beer looks very tempting Prost.

[Si Benson]

Evening Mr D...AKA Rocketman,
Might of known there would be some V2 shenanigans from you! Looks like a thoroughly complicated and technical build mate....please tell me you’ll finish this one though

[Allen Dewire]

Yea, It's the old dangerous man again,

I shot a couple of pics from the Das Werk kit to explain what I was babbling about earlier, but first,

Paul, Go ahead my friend, have a drink on me!!! Glad you're here too....

Mr. Benson, You know me well. The second time is always a charm with this one. I did manage to finish one GB so far in my life. That's something Simon and I had in common too.....

So, let's talk about the kit. The tires are made in 5 pieces. 8 x 5 equals 40 pieces for the tires alone, not counting the spare tire. I removed one tire, the bed frame and the floor piece last night and here's what we got,



Love the sink holes on the bed surface, but more about them in a few. The mat came in handy keeping the tire pieces correctly in sequence for dummies like me. You can see they are also sagged a bit which is a nice touch, BUT,



Ok, the pic is not the best as the iPad doesn't have a macro setting. If you look closely, all of the inner pieces have raised flash points all around them. This was a pain in the rectal anatomy to clean them up. Even more so with the soft plastic. This will be worse than doing indy links with a blindfold on!!! On to the trailer bed,



The detail is really fine as is the wood grain, but the sink marks are the pits. Luckily, I won't have to fill them because with the reels and other junk in place, you won't see them (ok, I'm lazy). Now one might ask why they aren't on the bottom of the bed. Here's why,



Is it just me or are there about 90 too many alignment pins on this puppy??? Das Werk does have an add-on kit of wood planking for the bed and the side panels, but this is really odd if you ask me. Maybe everyone who builds this kit will display it on a mirror to show the underside detail......................

That's it for now. I have to send mails to PaulE, Rick, Lee, Joe, Jim and others and remind them to vote for Nixon tomorrow!!!

Prost
Allen

[Mini Me]

Too late Allen, I early voted and am eagerly awaiting the outcome.
Rick H.

[Guest]

Late in Allen, I'm still playing catch up, but this looks like a mission and a half!

[minitnkr]

Me too.
PaulE

[Allen Dewire]

Tricky Dick, Tricky Dick.....................Guess I'm too late...............

[Allen Dewire]

You're never too late Andy, Glad to have you in on my lunacy Sir!

Prost
Allen

[adt70hk]

Yea, It's the old dangerous man again,

I shot a couple of pics from the Das Werk kit to explain what I was babbling about earlier, but first,

Paul, Go ahead my friend, have a drink on me!!! Glad you're here too....

Mr. Benson, You know me well. The second time is always a charm with this one. I did manage to finish one GB so far in my life. That's something Simon and I had in common too.....

So, let's talk about the kit. The tires are made in 5 pieces. 8 x 5 equals 40 pieces for the tires alone, not counting the spare tire. I removed one tire, the bed frame and the floor piece last night and here's what we got,

[ATTACH=CONFIG]n1136218[/ATTACH]

Love the sink holes on the bed surface, but more about them in a few. The mat came in handy keeping the tire pieces correctly in sequence for dummies like me. You can see they are also sagged a bit which is a nice touch, BUT,

[ATTACH=CONFIG]n1136219[/ATTACH]

Ok, the pic is not the best as the iPad doesn't have a macro setting. If you look closely, all of the inner pieces have raised flash points all around them. This was a pain in the rectal anatomy to clean them up. Even more so with the soft plastic. This will be worse than doing indy links with a blindfold on!!! On to the trailer bed,

[ATTACH=CONFIG]n1136220[/ATTACH]

The detail is really fine as is the wood grain, but the sink marks are the pits. Luckily, I won't have to fill them because with the reels and other junk in place, you won't see them (ok, I'm lazy). Now one might ask why they aren't on the bottom of the bed. Here's why,

[ATTACH=CONFIG]n1136221[/ATTACH]

Is it just me or are there about 90 too many alignment pins on this puppy??? Das Werk does have an add-on kit of wood planking for the bed and the side panels, but this is really odd if you ask me. Maybe everyone who builds this kit will display it on a mirror to show the underside detail......................

That's it for now. I have to send mails to PaulE, Rick, Lee, Joe, Jim and others and remind them to vote for Nixon tomorrow!!!

Prost
Allen

Allen

Great to hear that someone else that doesn't worry about what can be seen. As for clean up the flash, that midst have been a tense affair given the thinness of them.

ATB

Andrew