On my 1/16 RC ZTZ I started having an issue with the turret motor-turned out to just be a noisy motor.
Anyway, while off, I decided to add some glasswork to the cupola etc. I used an old CD, cut into it and then removed the silver backing leaving the bluish outer film layer.
This was then cut to size and fitted into the cupola, drivers port and the turret ranging port.
The colour on the picture with the barrel in focus is blue but, when it catches the light in different directions, you get slight reds and purples. Works rather well.
Anyway, while off, I decided to add some glasswork to the cupola etc. I used an old CD, cut into it and then removed the silver backing leaving the bluish outer film layer.
This was then cut to size and fitted into the cupola, drivers port and the turret ranging port.
The colour on the picture with the barrel in focus is blue but, when it catches the light in different directions, you get slight reds and purples. Works rather well.
Comment