1/35 Dragon 10.5cm K.Pz.Sfla.IVa Dicker Max with Voyager photo etch

[Jim F]

Good afternoon folks,
As stated in the animal group build 2019 for me is the year of photo etch, so I have a number of subjects I am looking to build before the start of the GB to enhance my limited skills. So this is the first candidate.


Here is a look at the Voyager photo etch.



This is approximately a third of the photo etch I will be using on the Hummel, I had bought the etch fender set but won't be using it as the Dragon fenders are superbly moulded and the etch would not enhance the kit in anyway. I don't really want to do sprue shots as there are enough on the web already.

First update coming sometime tomorrow
regards Jim

[Si Benson]

Afternoon Jim,
Looks like an interesting subject. I’ve only ever seen it built once but that was the Trumpeter version.
Good luck with the PE.
Best way to learn is to jump in like you are:thumb2:

[Jim F]

Thanks Si,
The hardest part so far is working from 2 sets of instructions:tired:
regards Jim

[Si Benson]

I hear you there....makes yer brain hurt sometimes :dizzy:!

[JR]

Good luck Jim, sure you'll do well with it .
The thought is enough for me, I always end up with the bits I could hardly see to begin with , yet alone attempt to bend in my ever growing PE box .!
John ?

[RonGlass]

Good afternoon folks,
As stated in the animal group build 2019 for me is the year of photo etch, so I have a number of subjects I am looking to build before the start of the GB to enhance my limited skills. So this is the first candidate.
[ATTACH=CONFIG]n1086817[/ATTACH]

Here is a look at the Voyager photo etch.

[ATTACH=CONFIG]n1086818[/ATTACH]

This is approximately a third of the photo etch I will be using on the Hummel, I had bought the etch fender set but won't be using it as the Dragon fenders are superbly moulded and the etch would not enhance the kit in anyway. I don't really want to do sprue shots as there are enough on the web already.

First update coming sometime tomorrow
regards Jim

[RonGlass]

Can't wait to see this John ! All that brass looks daunting !

[PaulTRose]

good luck!

will be an interesting one to watch

[Jim R]

Hi Jim
PE is such a mixed blessing. As you rightly say it is quite a task working the kit and PE instructions together and yet etch can raise a build to another level of detail. Deciding which parts of the PR fret are worth using also takes time.
I am sure you will make a cracking job of this.
Jim

[Jim F]

Good afternoon one and all,
I've spent a very frustrating 4 hours now trying to get the latches made, this is the defining sub assembly because if I can't manage these then on board lockers will be worse than the kit originals. The photo below shows the size of the pieces I am dealing with, anyway tactical withdrawl tonight onwards to battle again tomorrow.

[ATTACH alt="330134"]330134[/ATTACH]

regards Jim

[Steve Jones]

Blimey Jim! You dont do things by half do you sir! :smiling3: Just make sure you dont put it near any magnets. I'm feeling your pain with the latches, Jim having just done some myself. I wish you all the best with the build. Its going to be a joy to watch. Good luck

[Jim F]

Firstly my apologies for not replying earlier real life got in the way,
Thanks John this is a challenge but one I am determined to master,
Hi Ron this is one of the bigger etch sets but still a 3rd of the Hummel set, and yes it is daunting
Good morning Paul I hope I can maintain your interest.
Hi Jim, photo etch companies do fill their sprues with the smallest components definately not fat finger friendly.
Hi Steve I'm realy struggling with the latches any advice wil be welcome.
Many thanks Jim

[scottie3158]

Jim,
Will watch this with interest.

[Jim F]

Hi Paul,
Good to have you along
Jim

[Guest]

Do not worry Jim, you will soon learn to read in sterio and dream in triplicate. Watching along with the usual reprobates.
Cheers, Mike.