Scotties Tilly

[scottie3158]

Hi Scottie, what's the difference in detail between this and the Tammy one. Looks like quite a lot of deformed parts encountered. But you're fixing it well. :thumb2:

Cheers,
Richard

Richard,
As far as detail goes I think the Tammy one would probably be better but this is fun and a learning curve.

[outrunner]

I too would recommend using a new tube/bottle of CA, as I remember from my IC flying days it does tend to go off. Model looking good none the less.

Andy.

[minitnkr]

Just one of the many reasons I dislike resin as a modeling medium. I have seen no monetary reason to chose it & the ONLY reason I do is because it's " the only table in town" for that subject. Hope it gets easier for you. PaulE

[Guest]

Very nice work Paul.

On the c/a sticking if you get some c/a primer. There are a number on the market. Prime one surface apply c/a to the other.

https://www.cromwell.co.uk/shop/adhesives-and-sealants/adhesive-activators-and-primers/ac77-scotch-weld%E2%84%A2-instant-adhesive-primer-20ml/p/MMM7252077G

[JR]

I remember being told to keep in in the fridge until needed, don't know how effective this is. Has anyone tried it ?

[rtfoe]

I remember being told to keep in in the fridge until needed, don't know how effective this is. Has anyone tried it ?

If I had tried I'd be dead by now...SWMBO would never let me. :smiling6::tears-of-joy:

Cheers,
Richard

[Guest]

If I had tried I'd be dead by now...SWMBO would never let me. :smiling6::tears-of-joy:

Cheers,
Richard

You are lucky Richard my wife would locked the fridge.

[JR]

If I had tried I'd be dead by now...SWMBO would never let me. :smiling6::tears-of-joy:

Cheers,
Richard

I had some in the fridge, had to keep it in one of those plastic boxes with a lid . You could always sat they were seeds undergoing treatment :smiling3:

[Guest]

Problem with keeping C/A in the fridge. C/A performs by using moisture to cure.

Put it in the fridge will produce moisture when you take it out. You can put it in a plastic bag but then you have to bring it back to room temperature before taking it out of the bag..

A tip I read was to put it in a bag with rice the rice taking up moisture. Not had any problems with C/A & going off. Just make sure I put the top on immediately & tight. A good number of times I have to pierce the nozzle but i assume this does seal the liquid into the bottle. That is the criteria sealing.

[JR]

Good point Laurie.

Problem with keeping C/A in the fridge. C/A performs by using moisture to cure.

Put it in the fridge will produce moisture when you take it out. You can put it in a plastic bag but then you have to bring it back to room temperature before taking it out of the bag..

A tip I read was to put it in a bag with rice the rice taking up moisture. Not had any problems with C/A & going off. Just make sure I put the top on immediately & tight. A good number of times I have to pierce the nozzle but i assume this does seal the liquid into the bottle. That is the criteria sealing.

[Steve Jones]

Nice to see the Tilley is off and running. Some terrific detailing as always. We all suffer from the CA not sticking when it is supposed too. I usually find its when the surface is not cleaned/prepared properly or the CA has gone off. Looking forward to seeing the next update

[scottie3158]

Cheers guys for the pointers I think I had an old bottle so changed it and no more problems.

[scottie3158]

After a number of failed attempts to make a tarp for the back I decided to splash out on the legend models version. It needed a lot of chopping about to get it to fit. It left a large gap at the front hence a lot of duro to fill it. Now it is in place the detail is very good.


cheers
Scottie

[Steve Jones]

That's an awesome mould from Legend. Well worth the extra cost. Great work my friend

[Jim R]

Hi Scottie
The tarp looks great.
Jim