Scale Model Shop

**Neil Merryweather** · 23 July 2022, 07:29

Originally posted by Mini Me

The detail on this model is magnificent!!.......I could never expect to find that in 1-87 scale,......someday perhaps. One can only dream

It's well within the bounds of possibilities, Rick,right now. The files are available to buy for less than £4 and all you need to do is rescale them and print away!
You would need to make adjustments to thickness in most areas probably, (especially as some parts are too thin even at 1/35 scale...)but with one's own printer and the relevant software ability one could experiment infinitely.
To be fair, you would lose some of the fine details,but who would be able to see them anyway?
This is the future, folks!

**Neil Merryweather** · 23 July 2022, 07:31

Ps, what a great build,Los.!
Not my thing but fascinating and impressive none the less

**Mini Me** · 23 July 2022, 14:57

Originally posted by Neil Merryweather

It's well within the bounds of possibilities, Rick,right now. The files are available to buy for less than £4 and all you need to do is rescale them and print away!
You would need to make adjustments to thickness in most areas probably, (especially as some parts are too thin even at 1/35 scale...)but with one's own printer and the relevant software ability one could experiment infinitely.
To be fair, you would lose some of the fine details,but who would be able to see them anyway?
This is the future, folks!

As you say anything is possible ........just not sure about the scale I work in. I contacted a friend who was having some stuff printed in 1-87 scale and he asked me if I needed some detail parts. I gave him an order for some 20 liter WW2 jerry cans......even sent a photograph. He sent me a sample and it was more like a 40 liter can and the details were more than a little muddy. Think I'll stick with the injected mold stuff for a bit longer.

**Guest** · 23 July 2022, 17:41

Measurements of jerrycans are not that hard to come by (I could go into the garage and measure up a post-war version of the German/British type if I wanted to) so there’s really no excuse for 3D-printing them far too large, IMHO …

**Mini Me** · 23 July 2022, 21:23

I already went down that street with the friend who offered to have them printed......when he said that was as small as they could be made and still have the three separated guards and handle at the top I politely told him.....No thanks.

**Panzerwrecker** · 25 July 2022, 19:01

Originally posted by Strenko J

Simply incredible detail and such a superb build…keep it coming

Cheers Joe

Originally posted by prichrd1

Los,

Amazing result, even with the minor faults that you have highlighted - you can still have those on a mass market kit!!
I for one would be proud of that result :thumb2: :thumb2: .
Can you tell me what printer you are using?
I have been looking into them and have noticed the prices recently have lowered slightly.

Paul.
:smiling:

Thanks Paul. I don’t actually have a printer…….yet. I asked the designer if he could print me one and he kindly did. In fact he sent me two, with a selection of wheels too. The 3D file is incredibly good value at under £4 so if you have a printer you could print as many as you wanted, maybe even change the scale etc.

Originally posted by Tim Marlow

That really is a fabulously detailed kit, and you are more than doing it justice. The issues you mention are simply part of the learning curve required for working in a relatively new material. Now you know about them you will start identifying them much earlier in the build and they will become less of an issue. Stunning work.

Hi Tim. thank you and and I 100% agree. I have already started building the second trailer and from the off I’m ensuring I don’t make the same mistakes. More delicate handling, more patience with removal of all the supporting nubs etc. But most importantly giving the larger parts a coat of primer to better see and identify all the areas that need cleaning up. I have also used far less CA than I would think is required without issue too.

**Panzerwrecker** · 25 July 2022, 19:12

Originally posted by scottie3158

Outstanding

Thanks Paul.

Originally posted by Neil Merryweather

Ps, what a great build,Los.!
Not my thing but fascinating and impressive none the less

Appreciated Neil. It’s the future and one I probably wouldn’t have tackled unit I convinced myself of the benefits and had already invested in a 3D printer. I think maybe 1/16 scale would have been a smoother introduction to this new medium and most definitely much easier to build. The scale thickness of some of these 1/35 parts is crazy thin!

It has thankfully highlighted the fact my tired old eyes require some artificial assistance. An optivisor, an LED 1600 lumen bifocal magnifying lamp and a new 2600 lumen desk lamp have just been ordered. It’s going to be a real eye opener:tongue-out3:

**Panzerwrecker** · 26 July 2022, 03:11

A quick update after a late session.

Although I'm still finding more of those pesky printing support nubs which is starting to drive me crazy it was time to choose colours for the base coat. As it will be pulled by a Sd.Kfz 7 self propelled Flak 43 which is already completed in plain Dunkelgelb I decided to keep it simple.

Starting with a homebrew mix of Tamiya Red Brown through shades to Dark Yellow XF60 it was finished off with Mission Models excellent late 1945 Dunkelgelb. The base coat was then given a coat of Tamiya semi gloss clear mixed with a drop of clear yellow to seal it for the upcoming weathering steps.

All the different colours on the accessories were blocked in by paintbrush with Vallejo acrylics. The ammo containers were airbrushed with the same Dunkelgelb mixes only they didn't receive the final highlight colour so as to give them a different tone to the trailer. Random acrylic washes further enhanced them with some colour variation. A stippled mask was also used to give the paint a distessed and worn look.

Jerry cans and fuel tins were first airbrushed with steel and grey acrylics and then treated to a fine mist of hairspray. After base coating them the paint was then distessed and scratched exposing the underlying paint or bare steel.

The tyres were given a coat of Tamiya tyre grey which is now my go to tyre colour since I ran out of Vallejo's Dark rubber. Once dry a tyre mask allowed the wheel to be painted the same colour as the rest of the vehicle Any overspray will contribute to future weathering as to my eye, it always gives a nice feathered dust like appearance around the rim.

The bottles in the box in the roof rack were picked out in Vallejo Green Taillight acrylic and IMO does a pretty convincing job.

The uniforms in the wicker basket look all washed out as I only glazed over some Vallejo German Field Grey over the Black and white Zenethal modulated primer coat. These along with the basket will be finished off with oils.

Sadly the original primer coat on the main assembly which was painted during the hot weather still makes the paintwork look pretty crusty in places. There are just too many fragile parts attached now to allow any further smoothing out. We will just have to see how I can best disguise these areas.

Another issue which has come to light since the primer was laid down is a couple of wonky wheel bolts. Instead of being included in the wheel print these were provided separately. The bolts are all on a small block and have to be cut off individually. Cutting them off square is difficult and doesn't help alignment in the holes on the extremely thin wheel face. Tapering them would have been a better solution. Designing stud holes in the hub face could allow them to mate with the wheel without any raised surface, and could also have the benefit of just attaching some wheel studs showing a removed wheel.

The 3.7cm ammo shell containers came in a variety of colours and late in the war they appeared to be in a kind of Field Grey colour. Lubrication grease sometimes gave them and all together different appearance.

I'll give the varnish a day or so to harden then it's time for a relaxing bout of highlights and shadows care of some oils and a pin wash.

Attached Files