What's on the Bench? 2021

[The Smythe Meister]

Well,Here`s a broadside from me!!:dizzy:
I was getting a bit of "repetitive paint syndrome" going on recently, FAR too much [COLOR=rgb(65, 168, 95)]GREEN [/COLOR][COLOR=rgb(0, 0, 0)]being used!,(Sorry John!!),
SO,i decided to lighten things up a little,as well as changing to a different subject:thumb2:[/COLOR] ,
COMPLETELY out of my comfort zone,but having seen Tim`s stuff recently,it`s certainly got my juices flowing......
..... my Daughter bought me these for last Christmas.... and i`ve wanted to try them ever since:smiling4:,I have absolutely no idea of how to go about them.... but here`s my progress so far.....

I don`t really know what i`m doing yet,so just having a go at one......

:rolling:

I`ve actually put some Blue down,and the base Tyre`s colours.... I thought i`d brush paint this,it`s gone kinda OK,but we`ll have to see!!
So then,All you proper Warhammer painters please accept my apologies,but it makes a pleasant change for me!!:rolling:
Andy..... (Helmet at the ready!!)

[Mark1]

Well,Here`s a broadside from me!!:dizzy:
I was getting a bit of "repetitive paint syndrome" going on recently, FAR too much [COLOR=rgb(65, 168, 95)]GREEN [/COLOR][COLOR=rgb(0, 0, 0)]being used!,(Sorry John!!),
SO,i decided to lighten things up a little,as well as changing to a different subject:thumb2:[/COLOR] ,
COMPLETELY out of my comfort zone,but having seen Tim`s stuff recently,it`s certainly got my juices flowing......
..... my Daughter bought me these for last Christmas.... and i`ve wanted to try them ever since:smiling4:,I have absolutely no idea of how to go about them.... but here`s my progress so far.....
[ATTACH=CONFIG]n1158874[/ATTACH]
I don`t really know what i`m doing yet,so just having a go at one......
[ATTACH=CONFIG]n1158875[/ATTACH]
:rolling:
[ATTACH=CONFIG]n1158876[/ATTACH]
I`ve actually put some Blue down,and the base Tyre`s colours.... I thought i`d brush paint this,it`s gone kinda OK,but we`ll have to see!!
So then,All you proper Warhammer painters please accept my apologies,but it makes a pleasant change for me!!:rolling:
Andy..... (Helmet at the ready!!)

A nice change, I must say I've been eyeing up a few resin figures after seeing the work of a few of the figure guys as well.

[Tim Marlow]

Interesting, we’ll get you over to the small dark side one day…..this is where it starts :tongue-out3:

[The Smythe Meister]

Well,thank you guys!!......
It would appear that this isn`t a favoured subject,(Something that i was more than expecting!!),
I`ve not done much that shows..... but it`s coming along quite nicely IMHO !!.....the destructions are vague,and the colour application even more so.... but here we are are currently......


Basic paints,with a tentative effort for high lights,a long way to go....but i have to say that i`m loving these Citadel paints.....
.... They`re giving a superb finish..... so any faults that happen in the final finish will be down to my meagre efforts!!:tears-of-joy:!!
Rather enjoyable this is!!
Andy

[CarolsHusband]

Famo und Tiefladeanhanger are begin...

[ATTACH]433189[/ATTACH]

[Mini Me]

Gotta love a FAMO! Rick H. :thumb2:

[Steve Jones]

Remember this bad boy and all his mates from my kitbash of Mirages 1/35 scale C7P Polish artillery tractor?



Well I have finally managed to get a splash of colour on them and set them up in their rightful places.





Happy modelling everyone

[Airborne01]

Steve, Behave - that's just too good!

[scottie3158]

Wow, some top stuff here,



Great work Graeme, BTW, for us old folks, whose kit is it? Tristar, cyberhobby or Dragon's???

That 88 is looking fantastic Dan! Nice and mucked up and love the winter camo too!!!

On the news front, The Mojo has returned!!! I finally got my first retirement done and it is retroactive from July. Just gotta finish up my German retirement next. Things are looking up and I have been playing at the table once again. My last evilbay wins are being used to celebrate,

[ATTACH=CONFIG]n1158537[/ATTACH]

Now what are Hetzer late tracks going to do without a Hetzer to put them on? Nuthin', so ya gotta build a Hetzer for them,

[ATTACH=CONFIG]n1158538[/ATTACH]

The Airfix re-box of the Academy kit. I have to admit this kit is a dream to assemble and the fit is almost perfect along with minimum cleanup too. An OOB build with a couple of quick fixes here and there out the stash for it. Happy to be back on track and I hope I can catch up with all the fine stuff going on the forum......

Prost
Allen

Mr Dewire as I live and breath, it's about time you cut some plastic. Good to see you back at the bench mate.

[Lee Drennen]

This was on the bench now it’s on the layout
[ATTACH]433398[/ATTACH][ATTACH]433399[/ATTACH][ATTACH]433400[/ATTACH][ATTACH]433401[/ATTACH][ATTACH]433402[/ATTACH][ATTACH]433403[/ATTACH][ATTACH]433404[/ATTACH][ATTACH]433405[/ATTACH]

[JR]

Remember this bad boy and all his mates from my kitbash of Mirages 1/35 scale C7P Polish artillery tractor?

[ATTACH=CONFIG]n1159126[/ATTACH][ATTACH=CONFIG]n1159124[/ATTACH]

Well I have finally managed to get a splash of colour on them and set them up in their rightful places.

[ATTACH=CONFIG]n1159125[/ATTACH]

[ATTACH=CONFIG]n1159127[/ATTACH][ATTACH=CONFIG]n1159128[/ATTACH][ATTACH=CONFIG]n1159129[/ATTACH][ATTACH=CONFIG]n1159130[/ATTACH]

Happy modelling everyone

Congratulation Steve, fantastic work.

[minitnkr]

Engineers distract again. Scratching an 8ton engineer low bed trailer to carry the company bulldozer.

[Allen Dewire]

Mr Dewire as I live and breath, it's about time you cut some plastic. Good to see you back at the bench mate.

Thanks Paul, you don't know how good it feels to be able to play again without the stress in trying to retire. Now if only I could catch up with your great build and all the others on here. Only a little while to go my friend. Hope you and the family are well too.

So, for all of you that thought I was just kidding about finishing this build, I have to burst your bubble. I have set up the spray booth and mounted a 6400K LED lamp to shine into it. The Hetzer is in it's final stages before it gets the hissy stick treatment. As of tonight, she looks like this,


Two pieces of etch, home made side skirts and a few pieces from Dragon out of the spares box. The other side,


My new helper, Maximus looks pretty impressed too. He just wonders why the wheels aren't mounted so he has a place to lift his leg when he has to go. A few more parts to add and then a red oxide base coat. When dry, comes late war Dunkel Gelb and then see what scheme I decide on. I might even paint Maximus too, as he is kind of bland in color.

Now for a quick tip for when you paint the road wheel suspension on your Panzer, axles on a truck or other things and are tired of using tape to wrap them for painting,


I use the rubber coating from 3 strand electrical wire. What's nice is it fits all axle sizes (along with other things), thick or thin. You just cut it a bit longer than the axle and go. If you should spray into it by accident, your axle still has 2/3 of it clean for gluing on the wheels. You can also use them over and over if you want, just make them a little longer to cover all bases and kits axle sizes. HTHs a bit!!!

Prost
Allen

[CarolsHusband]

Yeah. Could have done with that tip a couple of hours back before I did the FAMO. All my masking tape has gone useless so I ended up using some old pinstriping tape I had left over from a paint job i did a few years back. It was a bit of a fiddle.

I'll know for next time thanks.

[adt70hk]

Thanks Paul, you don't know how good it feels to be able to play again without the stress in trying to retire. Now if only I could catch up with your great build and all the others on here. Only a little while to go my friend. Hope you and the family are well too.

So, for all of you that thought I was just kidding about finishing this build, I have to burst your bubble. I have set up the spray booth and mounted a 6400K LED lamp to shine into it. The Hetzer is in it's final stages before it gets the hissy stick treatment. As of tonight, she looks like this,

[ATTACH=CONFIG]n1159153[/ATTACH]
Two pieces of etch, home made side skirts and a few pieces from Dragon out of the spares box. The other side,

[ATTACH=CONFIG]n1159154[/ATTACH]
My new helper, Maximus looks pretty impressed too. He just wonders why the wheels aren't mounted so he has a place to lift his leg when he has to go. A few more parts to add and then a red oxide base coat. When dry, comes late war Dunkel Gelb and then see what scheme I decide on. I might even paint Maximus too, as he is kind of bland in color.

Now for a quick tip for when you paint the road wheel suspension on your Panzer, axles on a truck or other things and are tired of using tape to wrap them for painting,

[ATTACH=CONFIG]n1159155[/ATTACH]
I use the rubber coating from 3 strand electrical wire. What's nice is it fits all axle sizes (along with other things), thick or thin. You just cut it a bit longer than the axle and go. If you should spray into it by accident, your axle still has 2/3 of it clean for gluing on the wheels. You can also use them over and over if you want, just make them a little longer to cover all bases and kits axle sizes. HTHs a bit!!!

Prost
Allen

Genius!!!