Alternative to Dremel?

[Dave Ward]

Dave, just found this on the rainforest site
whizzy grindy thingy me jiggy it might help..

At that price might be worth a punt!
Dave

[The Smythe Meister]

Just goes to prove you can't help a Yorkshireman!! ....
He asks for a cheaper,and better alternative...
.. you provide, not only,a product for less than HALF THE PRICE,that does ALL he wants,and with LOADS OF EXTRA BITS,....and that has been tried and tested for YEARS .... BUT..
.... He doesn't want/need the extras,and will keep looking!! ...
Glad I'm just a simple Devonian methinks!!

[Dave Ward]

Just goes to prove you can't help a Yorkshireman!! ....
He asks for a cheaper,and better alternative...
.. you provide, not only,a product for less than HALF THE PRICE,that does ALL he wants,and with LOADS OF EXTRA BITS,....and that has been tried and tested for YEARS .... BUT..
.... He doesn't want/need the extras,and will keep looking!! :smiling3: ...
Glad I'm just a simple Devonian methinks!!

Andy,
in these days of financial turmoil, it is my duty, as a Yorkshireman, to do research, with due diligence, before committing to capital expenditure................
look after the pennies and the pounds will look after themselves
Dave

[Scratchbuilder]

Hello Dave,
I have a COMO drill set, not rechargable but it takes about five minutes to set up and has a variable speed controller, like you I just use it for grinding and slitting. I cannot remember where I bought it, but was probably from evilbay.
Mike.

[Steve Jones]

I second the como drill. Very impressive piece of kit. Recommended by Mr T and Jim.

[Dave Ward]

The whole point is that I would like a cordless gizmo - I have a Dremel, but it takes up too much room on my bench & the cables are a drag. It means that when I could use it for a small job, I don't. If I have a cordless, then I can use it straightaway & keep it immediately to hand.
When I think on how many times I have used the Dremel, twice this year & not much more in the preceding years, then I realise it was NOT one of my most cost effective purchases - one of those 'got to have it' moments that I normally resist! I realise that I don't need the power that the larger rotary tools have - only working on plastic & at a push modelling clay doesn't need a lot of Oomph!
I'm going to get one of the cheaper ones - my brother has expressed a liking for the Dremel & I'll gladly post it to him.
Dave

[Scratchbuilder]

The whole point is that I would like a cordless gizmo - I have a Dremel, but it takes up too much room on my bench & the cables are a drag. It means that when I could use it for a small job, I don't. If I have a cordless, then I can use it straightaway & keep it immediately to hand.
When I think on how many times I have used the Dremel, twice this year & not much more in the preceding years, then I realise it was NOT one of my most cost effective purchases - one of those 'got to have it' moments that I normally resist! I realise that I don't need the power that the larger rotary tools have - only working on plastic & at a push modelling clay doesn't need a lot of Oomph!
I'm going to get one of the cheaper ones - my brother has expressed a liking for the Dremel & I'll gladly post it to him.
Dave

Understood Dave, But suggested the COMO as an alternative. I am the same with the Dremel, got the drill, stand etc and used it only a couple of times. And since then it has been hung up in the shed keeping the spiders happy....
Mike

[langy71]

Dave, if you do take a punt then please let us all know how you get on with it,
i'm currently toying with grabbing another, but it's all down to how much i think i'll use it..

(my father is a yorkshire man, so i'm guessing some of the caution i have about throwing good cash around must come from him...does that now make me an honorary Yorkshireman ?)

[AlanG]

does that now make me an honorary Yorkshireman ?

i wouldn't lower yourself down to that level lol

[Dave Ward]

Dave, if you do take a punt then please let us all know how you get on with it,
i'm currently toying with grabbing another, but it's all down to how much i think i'll use it..

(my father is a yorkshire man, so i'm guessing some of the caution i have about throwing good cash around must come from him...does that now make me an honorary Yorkshireman ?)

Chris,
sorry - to be a Yorkshireman. you not only have to be born in Yorkshire. but both parents have to be Yorkishire born as well - on my maternal side we've gone back to the 1780's ( all textile workers in Bradford ), but my paternals only goes back to the 1900's! ( my great - grandmother came from Derbyshire )
I'll certainly post up a review when I get it ( ordered 10 mins ago )
Dave

[langy71]

Damn.. the nearest I can get to that is my father, and his father were born in Yorkshire...(Scarborough to be exact), my Mother was born in Derby, funny thing is though that my surname apparently comes from around the Bradford area .... so i guess I could claim to be some sort of Hybrid ...lol

looking forward to your review mate

[Dave Ward]

Damn.. the nearest I can get to that is my father, and his father were born in Yorkshire...(Scarborough to be exact), my Mother was born in Derby, funny thing is though that my surname apparently comes from around the Bradford area .... so i guess I could claim to be some sort of Hybrid ...lol

looking forward to your review mate

The maternal side all seemed to be employed by one or two woollen mills & live locally - often on the same street & all went to the same church for births, marriages & deaths - so it was easy to track them down! The only one that stood out in the census returns was a 'Jacquard Card Puncher' - which had to be looked up! he rejoiced in the name of Orlando ( must have been a Shakespeare influence somehow )
One of the hopes in doing a family history is that something juicy turns up, but the maternal side were all solid law abiding citizens, with no scandals ( at least none we could track down ). On the other hand, the paternal side...................
Dave

[Adchap]

I've just been waterlining the Airfix Mauretania hull
[ATTACH=CONFIG]n1185937[/ATTACH]
I've had a Dremel for quite a long time. I never leave it set up, because of the cables & the need to have a spare electric socket. In consequence I don't tend to use it as much as I might. I wonder if anyone if anyone has a rechargeable/cordless alternative to a Dremel - their cheapest is around £70 - it doesn't have to be a 'professional' heavy duty model, just the occasional use - there are a few around, but some of them are pretty cheap & look it! I'm not really wanting to drill with it, just use a slitting saw, sanding drum & burrs - all for short periods.
I'd be grateful, if anyone could point me in the right direction ( especially through personal experience )
Cheers
Dave

Hi Dave, Aldi had a rechargeable one for about £16 the other day,

[Bugatti Fan]

The Parkside tools in Lidl are quite good. I have their bench disc sander that works well for me. I would imagine their cordless tool will be very good for the price.
Besides the cordless tool every now and again they have sets of mini tools in a round container for sale that can be used in their cordless mini tool and others like Dremel, Proxxon etc.

Incidentally, Proxxon make a large range of small power and hand tools for the modeller. They probably have a cordless rotary tool in their. They make good quality tools.

[Dave Ward]

The Parkside tools in Lidl are quite good. I have their bench disc sander that works well for me. I would imagine their cordless tool will be very good for the price.
Besides the cordless tool every now and again they have sets of mini tools in a round container for sale that can be used in their cordless mini tool and others like Dremel, Proxxon etc.

Incidentally, Proxxon make a large range of small power and hand tools for the modeller. They probably have a cordless rotary tool in their. They make good quality tools.

Thanks for that Noel - I went down the ( really ) cheap route:

https://www.scale-models.co.uk/threads/tacklife-rechargeable-rotary-tool-review.40311/

So far it does exactly what I want - it's only for light duty stuff on plastic, but I'm happy with it!
Dave