unconventional modelling materials list

[Guest]

headlight lenses / porthole windows.

want some free headlight lenses / porthole windows etc, then get your favorite lady to go to Sainsburys.

Womens underwear hangers ...... i'll let the pictures say it all

They're 9mm across and you get 12 per hanger

[ATTACH]45025.IPB[/ATTACH]

[ATTACH]45026.IPB[/ATTACH]

[yak face]

Nice one colin, im sure the r/c boat builders wil find these very interesting, cheers tony

[yak face]

1/32 aerial wire tensioning springs

Heres something i found last night while messing about , and i thought it will be perfect for the tensioning spring in the aerial wire found on some ww2 aircraft (BF 109 for example) What i did was to get an old guitar string ( tip: find someone who plays guitar and badger them to save you all their old or broken strings , they are invaluable for allsorts!!) I dont know which string it is but its the thinnest of the wound type. cut a short length about 2", then whilst holding one end carefully pull the wire thats wound around the core off. Dont pull it all off, just leave about 1/4" still on the core ,then carefully pull out the core wire . What youll be left with is a tightly wound tube of wire which you can tease apart a bit to your liking and cut to size .The way to fit it is to thread it onto the aerial wire before fitting ,then when its on , just slide it up to where you want it and fix with a tiny spot of pva. Its a lot easier and less mess than breaking light bulbs to get the filaments, plus its not as fragile. Here are the pics to illustrate it better , cheers tony

[ATTACH]45494.IPB[/ATTACH]

[ATTACH]45495.IPB[/ATTACH]

[ATTACH]45496.IPB[/ATTACH]

[ATTACH]45497.IPB[/ATTACH]

[tr1ckey66]

Superb tip Tony. I'll be looking into this on future aircraft.

Thanks for sharing

Paul

[Guest]

Another one for guitar strings. The thinnest wire ones are really stiff and take a bend well, so all sorts of uses there. Plus, if you cut a short section with side cutters, the resulting chisel end makes a serviceable ultra fine drill bit. Fine guitar strings are about 80p, and that's a lot of drill bits!

For nose weights I use lead shot or small ball bearings. Just mix them up with a little epoxy and pour into the nose cone before assembly.

[stona]

That is a great tip Tony,I've actually been down the light bulb filament road and very tricky it is too.

Guitar strings ( round wound) also make very good oxygen hoses.

Cheers

Steve

[Guest]

hey tony, iam building a bf109 right now and my son is a guitarist so i am gonna try that...nice one

[Guest]

Came across a great one the other day whilst finishing off a box of After 8 mints. I pulled the insides out of the box and low and behold i had three long strips of corrugated sheets. ideal for painting and making tin roofs etc. Very light and easy to cut.

Andy

[Guest]

hey andy you mean you have time to eat?lol

mobear

[Guest]

No mate, been at these since Christmas, took till now to finish them off lol

[Gern]

So having just finished those, you won't be needing any Eccles cakes on Sunday then?

Gern

[Guest]

lol. You win mate.

[yak face]

Heres a quickie. Ever needed a partcular thickness of plastic card/ styrene sheet and couldnt find any? I came across a supply of various thicknesses (although only small pieces) the other day . Ok heres where it gets technical--[ATTACH]48124.vB[/ATTACH] Take one of these (any flavour but this maker and the type with the separate corner of goodies to tip in), peel back lid , throw away lid (its not foil ,so no good) , shove contents down pie hole , wash out container , done. [ATTACH]48123.vB[/ATTACH] The plastic sticks fine with all poly cements and the sides bottom and edges are all various thicknesses , the bit round the top being particularly strong , all you need to do is cut it into bits . I know its not a huge amount but most of the time I only use small bits of plastic card anyway and its a useful reserve plus its one of my five a day ( sweet snacks) cheers tony

[ATTACH]51001.IPB[/ATTACH]

[ATTACH]51002.IPB[/ATTACH]

[flyjoe180]

That is a great idea Tony, thanks for the tip!

[Gern]

Hi guys, here's a couple of simple tips for this excellent thread.

I claim no credit for the holders made with small crocodile clips (the type used by electricians - I picked up 20 off ebay for less than a fiver) and wooden skewers from my local pound shop. I saw these on one of those airbrush painting guides that you guys recommended a couple of weeks ago. Standing them in a jar with other bits and bobs keeps them apart so you can paint lots of bits and keep them separate while they dry.

On the same site, I also saw the guy using a small stainless steel bowl for mixing paint. My missus found these (labelled 'Chutney bowls') in the local Wilkinson's store. I've included the Vallejo to give you an idea of their size. They're also flat bottomed so less likely to topple over.

I use the bent piece of PE as a scribing guide. It is only the left-over frame from some seatbelts, but it is thick enough to act as a guide for your scriber and thin enough to be bent round curved surfaces. It's also wide enough for you to tape it to the surface if you're worried about clamping it with just your fingers.

Sticking a short length of sprue like this to the handle of your knife stops it rolling about - and eventually falling off your workbench and stabbing something delicate such as the cat or your foot!

Gern

[ATTACH]51323.IPB[/ATTACH]

[ATTACH]51324.IPB[/ATTACH]

[ATTACH]51325.IPB[/ATTACH]

[ATTACH]51326.IPB[/ATTACH]

[ATTACH]51327.IPB[/ATTACH]