New Bedford Whaler - circa 1835

[spanner570]

I know there's not a great deal of interest in ships and boats, but it's nice to see more folks having a go at building one, so here's another to add to the ever increasing pile!


First, thanks to Derek for suggesting this model for me to have a crack at.....It has had excellent reviews.


It's a 1/200 scale by Academy. It's a great little kit with loads of detail, yet relatively few parts...suits me fine! I like trying different aspects of our game, so being a sailing ship, it will be new to me.


As I'm 'dipping my sailing ship toes' I didn't want to tackle anything bigger - I doubt I would have the resolve to finish it anyway.


Just like the Severn Lifeboat build I posted on here, it's going to be a trilogy. - In harbour / at sea, hunting....and ?! (I'll leave that one a secret)


Here's the box art....


[ATTACH]124239.IPB[/ATTACH]



Scale comparison....The hull is about 6" long.


[ATTACH]124240.IPB[/ATTACH]



Nice hull detail...


[ATTACH]124241.IPB[/ATTACH]



First off, I've made a start on the rat lines.....


In most plastic kits these are awful, but the ones with this are far better, so much so that I decided to file them down even thinner. I'm happy with the result and once painted, will do fine. I could have fiddled about and made my own, but I didn't see the point.


Here's the before and after...The 'after' is on the left!!!


[ATTACH]124242.IPB[/ATTACH]



That's it for now. Thanks for looking in.


Ron

[Guest]

Hi Ron.


I have a great interest in ships,so will be watching this.


You have done an excellent job on the rat lines and you can clearly see the difference.


I have made about 4 ships this year and still have a few in the stash including the Academy 1/350 USS Indianappolis,deluxe version.


Here is a pic of the Academy 1/700 Titanic I did this year with toms detail set.


All the best.


Ralph.


[ATTACH]124243.IPB[/ATTACH]

[eddiesolo]

Nice job on the rat lines Ron, as you say 90% of these with kits are just so bad, so out of scale an not a lot you can do with them.


Nice hull detail too, is that copper sheet on the lower hull?

[spanner570]

Thanks for the comments chaps....


Nice Titanic Ralph.


Yes Si, it is copper and nicely detailed for a hull that's only 6" long.

[Guest]

That looks a really nice kit Ron, lovely hull detail; look forward to it's progress. How about a little detailed explanation on how you paint the Whaler as you progress, for us meer mortals. I would love to be able to hand paint. Derek

[geegad]

Ahoy there....More tiny work one day I will get the guts to buy one and start it..Look forward to seeing you get Underway.

[Guest]

Interesting subject Ron.


And excellent start as well, the work on the rat lines looks great

[monica]

it is nice to see some boats/ships,always have liked them,


nice start ,


and I have some think on the way as well,but will be different from this type,

[papa 695]

Nice one Ron going to watch this

[Gern]

Nice start so far Ron. I would probably have tried to make my own ratlines from thread using the kit ones as a template, but even that would be oversize at 1/200 scale. Once yours are installed and have had a coat of paint I'll bet they're going to be fine.

[Dave Jay]

I like this Ron, really small scale with a great level of detail, work on the ratlines is great.


Interest in ships and boats or not doesn't really matter, it's all interesting full stop.


I have a long term project underway.......a model slipway Maggie M trawler, 50% done, working on the upperworks, wheelhouse is done. Came to a stop building her due to a house move 8 months ago, the Maggie is in storage at my dads, I must go and rescue her soon.


I must cut down in what interests me!

[spanner570]

Thanks for your encouraging posts folks....


As the weather has been a bit naff, I've been able to do a bit of work on the whaler.....


First coat on the cutters. See how by doing across strokes the weathering is already showing......


[ATTACH]124627.IPB[/ATTACH]



This paint scheme is a great example of the brush painter's creed...I know I've banged on about it in the past, but always remember dark colours over light. It's easy to brush paint a dark colour over a light one, but try it the other way around!


So here is the white first coat...slap it on all over and don't fiddle.






After the three thin coats of white comes the black. I've read on here people have used that many coats of brush applied paint , the detail vanishes.....I can only assume incorrect thickness paint was used, because with only the three coats of white I've obliterated a very, very dark piece of plastic.


The black.....Now is the time to be careful. When cutting in never hold your breath.....(Yes you do!) Doing so makes your heart thump and your hand shake, and if held for too long you will certainly die!


So breathe normally....


I use a rigger brush to cut into the white line, then a larger flat headed one to infill.


See how the initial white coat is showing through here and there on the lower hull? Don't worry, it all helps in the end......






Here I have given the copper plating a first diluted coat of metallic, don't be too fussy where it meets the black timber. I like the paints to blend in where weather and water are key players. Put plenty of paint on so it runs down the hull to give a 'hit and miss' look. Also, I've painted the ports using a cocktail stick dipped in the paint...






Apart from final weathering and a bit of work on the copperwork, here is the finished hull. The faint flecks of white can just be seen below the waterline, and is starting to give a sort of patchwork to the copper sheathing.....Although not too noticable, I have given the sheathing a well watered down coat of black matt paint to dull the copper a bit.






The finished bow-sprit, masts and cutter davits...






Showing some nice detail on so small a kit......






The kit only has standing rigging, i.e the ropes that keep the masts etc. upright. I intend to rig the model with running rigging too. For ye land lubber swabs, running rigging and halyards etc are for, amongst other things, raising, lowering the sails - any rope that can be hauled up and down really! So I'm going to add some of this to the general whaler rigging. Also, the cutter davits will need some rope work too.....


I've been well impressed with the fit and detail on this very small scale ship.


Next up I will have a go at the deck and sail halyards before I fix the masts into position and also finish painting the cutters.


Thanks for look in.


Ron

[Guest]

The Master at work.....thanks for the painting guide notes Ron, much appreciated. I think with the complex cameo scheme in the Scharnhorst, I will have to do some hand brushing, so your guidance is very timely. Much appreciated. Derek

[spanner570]

Thanks Derek, glad to be of some help and thanks also for messaging me about the whaler kit....


What is the paint scheme on your Scharnhorst? Is it on Google Images?

[Guest]

Hi Ron, I hope it will look something like this when I am finished. It's all the raised surfaces and projecting PE on the superstructure that will be fun. Derek