Del's Titanic build. Academy limited edition

[Del640]

Test the led’s by connecting them directly to the power without the switch. If they light up it’s the switch.

YOU SIR, are a star.
Faulty switch, so I shall bypass!

[boatman]

YOU SIR, are a star.
Faulty switch, so I shall bypass![ATTACH=CONFIG]n1145140[/ATTACH]

AH GOOD Del glad you got it sorted
chris

[Guest]

At least we know it’s not the led’s!

I would examine that switch and try switching the sockets round before binning it.

[boatman]

At least we know it’s not the led’s!

I would examine that switch and try switching the sockets round before binning it.

WELL Done chris for sorting out dels leds you the man

[Guest]

WELL Done chris for sorting out dels leds you the man

Sometimes I have a use!

[Del640]

At least we know it’s not the led’s!

I would examine that switch and try switching the sockets round before binning it.

It's not well made so it's just as easy to pop a battery out tbh..

[boatman]

Sometimes I have a use!

CHRIS more than sometimes you helped me on my mouse arrow an now its a lot easyier to spot so keep the good advise comin
chris

[Guest]

It's not well made so it's just as easy to pop a battery out tbh..

Very true!

I’m sure boatman chris has a switch laying around....

[boatman]

It's not well made so it's just as easy to pop a battery out tbh..

DEL you ca buy tiny switches from componets shop online an then all you have to do is fit it in the red wire so its a make an brake so on an off

[boatman]

Very true!

I’m sure boatman chris has a switch laying around....

WELL ive got a switch to spare Del as long as you will ues it an its a very tiny one about 4 mm long an you can have it if you pm me your address as i will send it in a tiny envolope just say
chris

[Del640]

WELL ive got a switch to spare Del as long as you will ues it an its a very tiny one about 4 mm long an you can have it if you pm me your address as i will send it in a tiny envolope just say
chris

That's incredibly kind of you, message on route!

[boatman]

HI Del ive posted the switch to you this morning an its on it way to you an when you get it after youve soldered on your wires do not try an c/a it as it will get glue in it an become no good best idea i use with these tiny switches is cut a tight fitting hole in a bit of plasti card an just press the switch in place then glue the plasti card to the ship where you want it chris

[Del640]

HI Del ive posted the switch to you this morning an its on it way to you an when you get it after youve soldered on your wires do not try an c/a it as it will get glue in it an become no good best idea i use with these tiny switches is cut a tight fitting hole in a bit of plasti card an just press the switch in place then glue the plasti card to the ship where you want it chris

Brilliant Chris, thank you.

My intention is to place it at the rear of the stand if it doesn't sit happily in the existing power hole.

Either way it'll be fine!

Thanks again.

Del

[Del640]

First wooden decking placed, it's purported to be pre cut but it isn't...fortunately it's pre marked so a fresh blade in my Swann Morton and away I go.

The sheet has an adhesive on the backing which is bloody strong...no mistakes, you need to get it down first time, it doesn't move and you can't shore it up either (you can before you remove the back but it's still tricky when you come to apply it!)

Del

[Del640]