Scale Model Shop

Collapse

Marivox 1/72 Saab-17 - Inbox Review

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dave Ward
    SMF Supporters
    • Apr 2018
    • 10549

    #1

    Marivox 1/72 Saab-17 - Inbox Review

    Marivox are a Swedish maker of short run kits, although the box is labelled made in Poland! they've only produced a few models, but still seem to be around.
    The Saab-17 was a homegrown Swedish product, that first flew in 1942 as Sweden was neutral during WWII, they had no access to emerging outside technologies, so the 17 looked rather old fashioned - it served in Sweden in front line service until 1948. Amazingly 48 were sold to Ethiopia & they served there until 1968. It served as a target tug in Austria & Finland. It could be fitted with wheels, or skis, or thee was a floatplane version. The Marivox version dates to 1997.
    Click image for larger version

Name:	DSCF2787.JPG
Views:	1
Size:	3.3 KB
ID:	1169774
    End opening box - a bit tatty, but this was a pre-owned model.
    Click image for larger version

Name:	DSCF2797.JPG
Views:	1
Size:	3.9 KB
ID:	1169775
    Marking Variants

    Sprue shots
    Click image for larger version

Name:	DSCF2806.JPG
Views:	1
Size:	3.6 KB
ID:	1169783Click image for larger version

Name:	DSCF2802.JPG
Views:	1
Size:	4.1 KB
ID:	1169780Click image for larger version

Name:	DSCF2810.JPG
Views:	1
Size:	3.4 KB
ID:	1169787Click image for larger version

Name:	DSCF2801.JPG
Views:	1
Size:	1.9 KB
ID:	1169779

    Decal sheet - almost as big as the box!
    Click image for larger version

Name:	DSCF2800.JPG
Views:	1
Size:	3.5 KB
ID:	1169778
    It claims there are marking for 16 aircraft 12 of them Swedish.

    Instructions
    Click image for larger version

Name:	DSCF2798.JPG
Views:	1
Size:	2.9 KB
ID:	1169776Click image for larger version

Name:	DSCF2799.JPG
Views:	1
Size:	2.6 KB
ID:	1169777
    Instructions A3 - line diagrams - the assembly drawings are confusing & it's difficult to work out which bits fit with which variants.

    Detail shots
    Click image for larger version

Name:	DSCF2803.JPG
Views:	1
Size:	3.6 KB
ID:	1169781Click image for larger version

Name:	DSCF2805.JPG
Views:	1
Size:	2.1 KB
ID:	1169782Click image for larger version

Name:	DSCF2807.JPG
Views:	1
Size:	1.9 KB
ID:	1169784Click image for larger version

Name:	DSCF2808.JPG
Views:	1
Size:	1.5 KB
ID:	1169785Click image for larger version

Name:	DSCF2809.JPG
Views:	1
Size:	2.6 KB
ID:	1169786Click image for larger version

Name:	DSCF2811.JPG
Views:	1
Size:	2.3 KB
ID:	1169788

    Detail is pretty soft, there are some big ingates, and quite a bit of flash, but no sinks or injector pin marks. The canopy looks a little cloudy, but a wash & a dip in Kleer will hopefully cure that. The panel lines are very faint, but engraved. Colour call outs are referenced to Humbrol paints. There are a lot of optional parts, to go with specific markings, and the instructions aren't that clear - so careful study will be needed. There is the option of Skis & Floats, although you would need to make some sort of beaching trolley for the floatplane. This looks highly makeable, perhaps as an introduction to a short run kit...................
    Availability - Yes - various stockists - at a reasonable price, of around £14 ( + p&p ). I got mine from ebay at < £14 delivered.
    It's a relatively unknown aircraft outside of Sweden - I was surprised to See the Austrian, Danish, Ethiopian & Finnish markings!
    Dave
Working...