Strange problem with compressor

[JR]

Had a problem with mine , it ran , just no pressure ! After a lot of messing about binned it .
Bought one of those with out a tank from Iawata .

[stillp]

I hope I won't need a new one John. It works fine above 15psi. If the new regulator doesn't cure the problem I might try an inline regulator.
Pete

[Tim Marlow]

I hope I won't need a new one John. It works fine above 15psi. If the new regulator doesn't cure the problem I might try an inline regulator.
Pete

I must admit that’s how I run my Iwatta. Set at full delivery pressure and stepped down at the airbrush stand by a second PRV. It means I can keep the compressor under the bench and just have to switch it on and off at the start and end of a session. All the fiddling to set pressure can then happen straight from my chair when I’m working….

[Jim R]

Interesting. I'm the same as Tim. The compressor is under the bench and set at 25 psi. I have a MAC valve on the airbrush which I use to reduce the pressure to what I need.
Jim

[stillp]

I might think about a MAC valve Jim. I hardly ever change my pressure setting though.
Pete