Scale Model Shop

Collapse

Gloss/Laquers over metallic colours?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Adrian "Marvel" Reynolds
    • Apr 2012
    • 3008

    #1

    Gloss/Laquers over metallic colours?

    Hi all,

    Anyone able to advise me the best gloss or laquer to put over metallic paints, I'm currently working on a model that has gold and silver and want to protect it, I tried a quick test with the Humbrol Spray can gloss but it turned the silver to a duller dark metal.

    Would the Vallejo gloss be a good safe bet to use?

    Adrian
  • Andy2035
    • Aug 2011
    • 730

    #2
    With the cars and trucks I always use the Hycote Clear Lacquer, works great and is easy to use...: -

    HYCOTE CLEAR LACQUER SPRAY PAINT - 400ml | eBay

    Hope that helps...

    Andy...

    Comment

    • Adrian "Marvel" Reynolds
      • Apr 2012
      • 3008

      #3
      How is it over decals, had a bad experience once when a car clear lacquer actually melted my decals Perhaps I applied it too thick ?

      Adrian

      Comment

      • Ian M
        Administrator
        • Dec 2008
        • 18259
        • Ian
        • Falster, Denmark

        #4
        Alclad Aqua coat. Its formulated to use over Alclad metal finishes, and as the name implies is water based so should be pretty safe.

        I have not used that one but their other clear coats are very good and do not affect the finish.

        Vallejo's varnishes should also be OK.

        Ian M
        Group builds

        Bismarck

        Comment

        • Andy2035
          • Aug 2011
          • 730

          #5
          When I did the Mitsubishi EvoI used the Reg plates and the Make and model badges, I used the Microscale Micro Set and Micro Sol to fix them and didn't have any problems...

          Comment

          • Adrian "Marvel" Reynolds
            • Apr 2012
            • 3008

            #6
            Well a few days ago I got the Alclad Aqua Gloss from the shop ( great fast delivery again ) and tried it out. Well it covered the gold paint nicely but the Hotmetal red seemed to react and tarnished to an almost burnt looking colour. I didn't water it down and sprayed fine mist coats as per the instructions at 15 psi. Any ideas where I went wrong?

            Adrian

            Comment

            Working...