A few questions about paints

[Guest]

Hey guys, I am looking to build my first model and I have a few questions about painting it, which is the part I find most difficult. Would you help shed some light on the topic?
What I need help with is:

- Does using a primer help preserve details?
- What exactly happens if you use generic spray paints on plastic? I read you are not supposed to use real car paint on car models because they are far more aggressive, but nothing about generic sprays.
- Are there any model stores in London where I could see what the colour looks like in real life?

Lastly, I am looking to build the model attached and get the colour scheme from the images below (minus the weathering). I’m having difficulty finding the correct spray paints though, since they are not the ones in the manual. Does anyone have any suggestions for what I could use for the bottom part of the body (the dark grey) and the top part (super light grey)?

The model is this: https://www.revell.de/en/products/mo.../id/05133.html

Thanks in advance.

[BarryW]

Welcome to the forum. Might be best if some of our ship builders help you with this one. I build aircraft. That looks a bit of a challenging build for a first kit, lots of p.e. I should think. My only advice would be to practise with a cheap simple kit first.

[Guest]

If used excessively, primer can clog detail. However, it helps paint adhesion massively and I always use it when spraying metalizer paints, as they tend to rub off (in my experience) without primer. In your case, get some primer, maybe some Mr Hobby surfacer 1000, thin it down and spray evenly prior to painting
Cheers, John

[Guest]

Btw, it would help if you stated what you are building

[Guest]

Btw, it would help if you stated what you are building

Sorry, I attached a link.

[Guest]

If used excessively, primer can clog detail. However, it helps paint adhesion massively and I always use it when spraying metalizer paints, as they tend to rub off (in my experience) without primer. In your case, get some primer, maybe some Mr Hobby surfacer 1000, thin it down and spray evenly prior to painting
Cheers, John

Good to know, thanks for the suggestion.
When you say 'metalizer paints', do you have any in mind? Any I could use for the fin?

[Guest]

Welcome to the forum. Might be best if some of our ship builders help you with this one. I build aircraft. That looks a bit of a challenging build for a first kit, lots of p.e. I should think. My only advice would be to practise with a cheap simple kit first.

Thanks Barry, I understand it's a difficult model and I intend to take my time with it and practice everything first. I am not worried about building it however, it is quite large, with large parts, so patience and practice should do it. What do you mean by p.e.? What are the top challenges you see with more difficult models like this one? I attached the link to it in the description.

[Guest]

Good to know, thanks for the suggestion.
When you say 'metalizer paints', do you have any in mind? Any I could use for the fin?

Search up Alclad II and/or Mr Hobby super Metallic and/or Mr Hobby Buffable.
Those are the main three that are known to produce superb effects. The buffable is more of a weathering product that can produce stunning effects if used well
Cheers

[Guest]

Search up Alclad II and/or Mr Hobby super Metallic and/or Mr Hobby Buffable.
Those are the main three that are known to produce superb effects. The buffable is more of a weathering product that can produce stunning effects if used well
Cheers

These all require an airbrush right? Are there any spray can solutions?

[Guest]

I agree with Bary, it looks a pretty full-on build for a beginner, possibly much better to start on something managable, and that doesn't really matter if it goes wrong!

[Guest]

These all require an airbrush right? Are there any spray can solutions?

In terms of metalizer paints, they all require airbrushing. Primers, have very good aerosol can alternatives.

[Guest]

I agree with Bary, it looks a pretty full-on build for a beginner, possibly much better to start on something managable, and that doesn't really matter if it goes wrong!

Thanks, I'll think about getting an easy model to practice on first.
What challenges do you see with this harder one?

[Guest]

Is this literally your first model? If so, too many to list! Firstly, its huge - just over a metre long. But most of all, if you've never built a kit before, you'll want to get to know the basics, the essential tools and adhesives, and how they work. Also, being Revell, it may have some manufacturing issue(!) - I know some of their kits are absolutely great, but similarly, some are really challengeing, and not for the right reasons!!

[Guest]

Is this literally your first model? If so, too many to list! Firstly, its huge - just over a metre long. But most of all, if you've never built a kit before, you'll want to get to know the basics, the essential tools and adhesives, and how they work. Also, being Revell, it may have some manufacturing issue(!) - I know some of their kits are absolutely great, but similarly, some are really challengeing, and not for the right reasons!!

Why do you say the size is a disadvantage? I played around with the parts and it seems easier to work with such large parts as compared to the tiny ones on a smaller model.
Yes, this is indeed my first model and I intended to practice using the tools and glues first then start on it. I do have crafts experience though, I built a guitar from scratch once.

I would appreciate it if you could tell me some of the challenges you foresee so I know what to look out for / do some more research into.
I did notice some parts are not a perfect fit but I'm sure with patience and care I can modify fix them.

[Guest]

Why do you say the size is a disadvantage? I played around with the parts and it seems easier to work with such large parts as compared to the tiny ones on a smaller model.
Yes, this is indeed my first model and I intended to practice using the tools and glues first then start on it. I do have crafts experience though, I built a guitar from scratch once.

I would appreciate it if you could tell me some of the challenges you foresee so I know what to look out for / do some more research into.
I did notice some parts are not a perfect fit but I'm sure with patience and care I can modify fix them.

I would say size is a disadvantage as well, as th parts count is higher, and there is more room for error. In a smaller kit, fit is tighter, with less flex all round. Bigger kits tend to have greater gaps and greater room for error if you get what I mean.