Hi reluctant to say finished, but it‘s try it and see time
had a couple of perspect sheets cut these to size and managed to borrow some clear flexible curtain they typically use in wearhouse for forklifts to move in and out off doorways.
lastly i put 2 old clip board clips on the outside face luck rather than good judgment but on Saturday while shopping i noticed some scrap wall paper being binned from a large diy store and asked if i could have it help your self was the reply so i took 3 rolls, my plan was to pin it inside the booth to act as an overspray catcher.. but noticed there was just enough room to slip it in the sides and i used the clips to hold in place simple but looks like it will work and preserve the back board a little.
will see how it performs over the next few days and tweek were required
had a couple of perspect sheets cut these to size and managed to borrow some clear flexible curtain they typically use in wearhouse for forklifts to move in and out off doorways.
lastly i put 2 old clip board clips on the outside face luck rather than good judgment but on Saturday while shopping i noticed some scrap wall paper being binned from a large diy store and asked if i could have it help your self was the reply so i took 3 rolls, my plan was to pin it inside the booth to act as an overspray catcher.. but noticed there was just enough room to slip it in the sides and i used the clips to hold in place simple but looks like it will work and preserve the back board a little.
will see how it performs over the next few days and tweek were required
Comment