Tamiya X22 vs Mr Hobby H-101

[slupanter]

Hi all,

I using X22 mixed 40ish:60ish (paint:thinner). Has anyone had a good time with Mr Hobby H-101?
To say I am scared of gloss coat would be an understatement; I have finally found a system that works, thanks to a friend, but interested to see if there is anything better out there.

EDITED: I do have a bottle of MRP-48 Super Clear Gloss too

[Tim Marlow]

Best high gloss I’ve found is Zero paints clear coat lacquer. Comes pre-thinned ready for use. Mr hobby with their Mr levelling thinner should be fine, as should Tamiya. I thin around fifty/fifty though.

[slupanter]

I do 3-5 passes with x22. What is your Zero process Tim?


[ATTACH]428430[/ATTACH]

[slupanter]

Best high gloss I’ve found is Zero paints clear coat lacquer. Comes pre-thinned ready for use. Mr hobby with their Mr levelling thinner should be fine, as should Tamiya. I thin around fifty/fifty though.

This stuff?

https://www.zero-paints.com/Clearcoat_Lacquer_60ml_Prethinned_ready_for_Airbrushing--product--7956.html

[Tim Marlow]

One pass. It gives a real wet look gloss. I only use it on cars and bikes though. If they need decals I will give them one pass, polish it, decal up, then a second pass as a finish. If they don’t need decals then one coat and a polish up with fine polishing compound gets the job done.
Anything that will be Matt varnished afterwards I just use one or two passes of Klear as a basis for decals. Seal the decals afterwards with a coat over the decals only, then Matt down the finish.

[Tim Marlow]

That’s the one. Got mine from Hiroboy I think.

[Mr Bowcat]

I've been using Mr Hobby GX100 recently for car and bike builds, and after a bit of practice have managed to get some very nice high shine finishes. It's a bit of a faff, I tend to put down 4 coats staring at 50:50 and ending with 80:20 thinner to varnish, but the results are very nice.

[slupanter]

I only use it for decals. I’ll have a look into Zero.

Mr Bowcat, how is GX100 compared to X22?

[Tim Marlow]

If you are just using it for basing and sealing decals then the Tamiya gloss should be absolutely fine Alexander.

[Mr Bowcat]

Alex, it's laquer based rather than acrylic, and to me seems to form a harder coat which is great if you are sanding and polishing for a high shine. It does of course smell more.