Since the end of my old layout, and the start of my new layout I have been learning more and more about this method of controlling the trains. So I decided to put it to the test on Whittle Green and use the layout as a means on knowing what it is like to see wether I like it or not and to see the functions it can support. Basicly, with DCC you get a constant power supply to the tracks whereas with the standard control you change this to make the train move. In DCC you control a small computer chip inside the loco which then tells it where and how to move, therefore you can have multiple trains moving in various directions and various speeds at the same time on the same peice of track. Each train has its own number which you use to on the controller to tell it to move. So if you wanted train 01 to move, you select '01' on the controller and move the speed knob. So BASICLY you are controlling the trains and not the track.
With the DCC you can have added extras to the trains, such as lights, sound and smoke which can all be turned on/off at any time whilst running from the controller. DCC can also control the points and signals on your layout by adding a small computer chip to them.
The only downside to the system is when you first start, trying to understand how it works but once you get over that there is another, bigger' problem. When you buy a loco you need to add between £10 and £20 for the computer chip (price difference on the type of chip). You then need to add more if you want lights, smoke or sound. But that comes at reasonable prices from various people.
You can find out more information on DCC from these sites:
www.dyserth-road.co.uk A friends DCC exhibition layout
www.modern-image-model-rail.co.uk John Humphries site showing the use of a computer to run trains.
www.electricnose.co.uk Steve Jones's website which shows his DCC system and also has a very good On My Work Bench.
And of course there is compact, but good information on my site about what I use and what I think of it.
Andy
With the DCC you can have added extras to the trains, such as lights, sound and smoke which can all be turned on/off at any time whilst running from the controller. DCC can also control the points and signals on your layout by adding a small computer chip to them.
The only downside to the system is when you first start, trying to understand how it works but once you get over that there is another, bigger' problem. When you buy a loco you need to add between £10 and £20 for the computer chip (price difference on the type of chip). You then need to add more if you want lights, smoke or sound. But that comes at reasonable prices from various people.
You can find out more information on DCC from these sites:
www.dyserth-road.co.uk A friends DCC exhibition layout
www.modern-image-model-rail.co.uk John Humphries site showing the use of a computer to run trains.
www.electricnose.co.uk Steve Jones's website which shows his DCC system and also has a very good On My Work Bench.
And of course there is compact, but good information on my site about what I use and what I think of it.
Andy
Comment