Hornby Dublo restoration project

[Ancientmariner]

Commenced decals...

[Ancientmariner]

DISASTER! Decided to use a clear coat body lacquer on a tender today instead of a modelling lacquer. It did not like the paint!
Lucky I have two spares already painted up. It is worse than it looks as well

[Ancientmariner]

So after a disaster it's complete. Photos do not do it justice.

[Tim Marlow]

Looks good . Old stage three railer as well :thumb2:

[Ancientmariner]

Thanks Tim,

As a rule I only do 3-rail. The Phoenix paints and varnish just give a finish like nothing else I've ever used, exceptional.

Also I have fitted a double chimney to this model.

James

[Tim Marlow]

Thanks Tim,

As a rule I only do 3-rail. The Phoenix paints and varnish just give a finish like nothing else I've ever used, exceptional.

Also I have fitted a double chimney to this model.

James

Phoenix precision were my go to in the railway modelling days as well. Fine pigment enamels that sprayed well and covered nicely using their quick drying air thinners. Never noticed the double chimney, but then GWR wasn’t my specialty . Three rail stuff is great when it’s running. You can smell the ozone off the motors…..

[boatman]

HI James lovely model there you have done a very nice job of it an if i still had my trains i would be proud to have it on my layout very well done sir
chrisb

[Ancientmariner]

Decided to drag out a few bodies that have been at the back of the bench for a while and make some progress.

Also cutting a castle into a GWR star.

[Ancientmariner]

A few more undercoated today.....

[Tim Marlow]

Good grief James you’ve got more engines than Crewe works…..great stuff…..

[Scratchbuilder]

This takes me back to my train spotting days at New Street and Snow Hill in Birmingham, and then to the favourite spot in Aston where you got LMS etc on one line and under the bridge you got the GWR. Sitting in the bridge top with a flask of tea and jam sandwiches, note book ready along with the Ian Allen book of train numbers, and leaning up against the bridge would be the bikes ready for the trip home with the lolly stick in the brakes to make the 'clatter' noise... A quite enqiry from the local constable who was an adult spotter and spent more time on and around the bridge than he did on his beat, asking if the certain trai had been through. Then back home, pull the layout from under the bed, plug in the transformer and run the loco's untill supper time.

[Graeme C.]

You've certainly got a few to keep you busy James! Nice to see you bringing these old loco's back to life.

[minitnkr]

A labor of love for sure.

[Ancientmariner]

The production line continues with the addition of an 8F.....

[JR]

A very interesting read. Esp the discussion about pens. That ended with me looking at Bow pens and their use and lining pens on the web .