loving the build Ian iv a hood to build but at a far smaller scale , i will watch on
-
-
Well still at it. Just been grabbing an hour here and there and getting some of the sub-assemblies out of the way. Also been having lots of fun with PE and not so super-glue.
These two buggers took about half an hour each, just to put the 'spider web' over the tops! [ATTACH]275368[/ATTACH]
First the lower rail then the actual 'spider web' after! I even bought some new super thin CA which was just about effective as the water it was as thin as. Ended up using the old one. (and a lot of swear words).
[ATTACH]275369[/ATTACH]
A heap of pom-poms, 5,5lb'er twins, UP launchers (the square brass things). These where in effect a system that launched wire guided rockets into the air, where the tops split open ejecting loads of small mines on parachutes with wires hanging from them. The idea was that an attacking aircraft would snag the wire and pull the mine into it. In truth they caused more damage to the ship and personel than enemy aircraft and they saw very little use. (UP stood for Un-rotating Projectile).
I have shoot myself in the foot with the Pom-Pom guns! the platform should be dark grey and everything else the same colour as the Hull. Whoops.
[ATTACH]275370[/ATTACH]
Made a start on the big boys as well but lots to do to those yet.Comment
-
Come great work going on IanComment
-
looking real good,Ian,nice progress,so far,
Comment
-
Coming along nicely Ian looking really goodComment
-
Next time I suggest a Battleship, some one hit me up side the head! Well at least remind me to check that it will not need a whole heap of extra work to get it right! lol
Below is version 3 of the platform atop Gun III. The Kit has it as a solid platform of dubious shape. I was in fact two platforms of equal size and was also not a solid platform but an open girder sort of thing.
[ATTACH]275488[/ATTACH]
This as I said is version 3. These took almost two hours to make! the first one (of v1.0) took longer than that alone and looked like poo.
Version 2 looked a bit better but was still not right. To thick and to big!!!
This one is about as good as it is going to get. This will now sit to let the glue cure 100% then I can cut it off the tape. Then figure out how to mount the darn things!
Other boring bits... All those guns and bits are now primed along with all (I think) of the ships boats. Oh and I got a start on the foremast.... And the funnels...
Forgot to take photos along the way but I can take one or two later...
As a total side comment. I saw that there is mountains of snow in both Europe and the US. Some one I follow on You Tube has now had over five feet os snow. Twelve inches the other night.
Well here, it has been snowing for three days and we have ....... about an inch. Its not thawing it is settling. its just very dry and is blowing away. Where to? I have no idea. lolComment
-
So still no sign of the paint I ordered yet. I hope that it gets here soon. My benches are looking like a bombed ship yard with bits of ship EVERY where!
[ATTACH]275549[/ATTACH]
Made a start on painting the Ships boats. Hairy stick time! Any and all the info about how they where are pretty vage and contradictory, so I am winging it. All the boats had wooden decks, the rowboats inside under the benches where grey. Out side they where the same colour as the ship.
The Motor launches and the Admirals boat and what not the cabins where white. Bottoms white and sides Navy blue.
Above them are some of the dozens of chests and winches that are waiting for the paint to arrive!
[ATTACH]275550[/ATTACH]
Yet more bits awaiting the postman! Here the smaller guns and some bandstands...Hmm decks are painted so I could mask those up ready...
Ah the Ships screws. When I ordered the metal props, I was expecting them to be brass..... Wrong. White metal- So they had to be painted as well. Alclad II Polished Brass for that. Looks OK but would have liked brass ones.
[ATTACH]275551[/ATTACH]
The mast/boom still lots to do to this so more on that later.Comment
-
Looking great Ian, just popped in and spent a very agreeable 20 mins reading through this.
I thought there was a wooden deck kit for this?Comment
-
Doing well Ian. I am still not back to the Bizzy, just about recovered enough to continue but I am doing a quick build motorbike to see how I get on. Getting there thoughComment
-
Cheers Si. glad to have you along for the ride.
There is a Wooden deck on the market, but I didn't want to start down that road again! lol. You buy the deck, then you buy the PE and before you know it you have spent more than the kit was. And with the price on the box it would be silly money. The Pontus sets do look great and add a whole lot to the kit but at over 240 quid.... Nope.
lol. More important that you are 100% again before you get Bizzy.... se what I did there. O.oComment
-
Amazing patience and work, great job.Comment
-
Cheers chaps, it's good to know you've not all died of boredom
Just found out that the only flat brushes I have are the two very knackered old ones I use for dry brushing... HmmComment
-
Tip for the day. Badly acrylic painted boats can be quickly stripped back to enamel primer by giving them a bath in Vallejo airbrush cleaner! Yeah.Comment
Comment